Maintaining the highest level of data security requires continuous improvements in all the system components - including software and device firmware. Recent changes in the camera firmware are focused on improving the security level overall.
This article explains how to use the settings as per the devices current configured capabilities if you just added a device to BVMS, you get the possible stream options as per a “Config table” known to BVMS.
This article contains a simplified and generalized example, that could be helpful in building a particular tailored script related to implementation of event receiver in BVMS SDK scriplet.
When entering in BVMS Operator Client, the camera's image is black and only Transcoding option is available for streams (no stream 1 or 2 , or image pane optimized)
Desired result: See the camera's live image
If you add a decoder that has 2 monitors connected, you must display the Edit Decoder dialog box of the decoder and update the device capabilities of this decoder. For each monitor add a further monitor wall.
Check the sample script from this article. It is not a working script, that can be used directly. Follow the instructions in comments of the script to tailor it for your use.
New check in BVMS Configuration Client has been implemented, which blocks the disabling of the "Secure connection" if camera port 1756 is disabled. This should prevent the camera from getting "unreachable" by miss-configuration of the administrator.
The MBV-MBase is the license that allows you to extend the SMA in Remote Portal. You receive this license when you place an order to Order Desk for SMA extension and it must be activated in the Remote Portal and on the server like any other license.
If the Host Type was set to other value than “Factory Default” for DSA E2800 and you want to integrate it with BVMS, the targets will most likely not be scannable and there will be no recordings at all.
Follow these instructions from this article if the ‘error code=1’ appears in Configuration Client - License Manager during the license activation process.
This article explains what to do if there is an unexpected shut down (e.g. instant power cut) and you have to apply the BVMS licenses again on your unit
By design, the Dual-Recording feature is specific only in Bosch Cameras. 3rd party cameras are integrated into Bosch Systems like BVMS-VRM via our Video Streaming Gateway (VSG)