Security: Video

Divar 700 uses the concept where it assumes to be the (master) device to have control over the cameras and their streams.

This only happens when you perform the export in BVMS Operator Client.

This article explains step by step how to set Bosch Cameras & Divar network 2000 & UML-245-90 monitor to be able to retrieve audio.

You can collect Service logs from the unit using two methods. Both methods will save the service logs as a password protected ZIP file ( Example: ServiceLog-XXXXX.zip ).

This FAQ article explains whether it is possible to activate and use Alarm Out 1 or 2 via DIVAR Mobile Viewer App. One of the tests performed by Central Technical Support Team was on a DIVAR Hybrid 5000 with 6 outputs and they have used the latest firmware versions on DIVAR and cameras, so make sure you do the same.

This article provides an answer to the question: Can I restrict the live view or playback in VSC for certain cameras added in DIVAR hybrid 5000? Yes, you can restrict the live view or playback for certain cameras added in DIVAR hybrid 5000 for an user who is using Video Security App.

The red x  indicates that the password of the camera is not set in your DIVAR and you will be not able to see the camera’s image.

One of the possible traps  that DIVAR IP hybrid/network can send is HDD_STATUS_CHANGE. The HDD_STATUS_CHANGE is triggered when the status of the Hard Disk changes. 

According to the Release Letter for V3.1.1 and V.3.2.0 - "SNMP- No traps are launched for HDD status changes and recording stops"

If the administrator account (which was originally created when initial setup wizard was run) has been deleted locally and another new administrator account was created, then it is not possible to create user via web. Only locally is possible, as the application is still looking for the original admin account.

This article explains how you can change the relay mode back to automatic via a script executed when the relay open event is triggered.

When you are using letters in German language like ü, ö, ä for setting the password, the DIVAR doesn't take them into consideration and you will not be able to access your DIVAR. Therefore, please avoid using German letters when setting a password on your DIVAR Analog 3000.  

The Axis cameras can be added to the DIVAR Hybrid system and the Live view can be seen for a moment, but when going back to the settings to see the cameras, they are no longer available and the live view is also paused. What to do?

The HDD compatibility list for DIVAR AN 3000 and DIVAR AN 5000 in the Operations Manual, page 166 or you can find it through this article. Have a look!

Note that the recordings are not removed instantly. The recordings will be deleted on the next day at 12:00 AM, after the automatic delete is changed.

If you have for example a DIVAR 7000 AIO as central BVMS server and also, on the same network, you have a DIVAR Network Video Recorder (NVR) to which cameras are connected to and recording, the recording is typically handled by the NVR itself. Therefore, in this case the cameras added on the NVR will continue recording only there because the NVR manages the recording and storage of video footage from them.

DIVAR 5000 network or Hybrid do not support KBD-UXF. However, the KBD-DIGITAL is still a current product and can be used.