Security: Video

The RCPP command to enable/ disable the privacy masks is CONF_PRIV_MSK_POLY - 0x0bd8. Follow this article to see the rcpp command to enable & disable the privacy mask of a Bosch camera (moving or fixed).

After configuring the Virtual mask in the web browser of Bosch CPP7.3 camera and afterwards going back to the Live view, the Virtual mask appears as Privacy mask and is not transparent and other inappropriate behaviors have been noticed. This happens on the Bosch CPP7.3 cameras that have FW version older than v.7.86.0019

Find out from this article what to do if the System Overview of Bosch camera shows the IR controller FW version as zeros

Find out from this article what to do if the System Overview of Bosch camera shows the Motor controller FW version as zeros

Find out from this article what to do if the System Overview of Bosch camera shows the SC or Camera controller FW version as zeros

Unsupported camera model: Auto-calibration is currently not supported for this camera model. Calibration could produce wrong results or might not work. Why is this message displayed in Configuration Manager?

Select the resolution of the JPEG images. You can choose between various <formats>: – 720P: 1280×720 pixels (only available for HD cameras). – 1080P: 1920×1080 pixels (only available for HD cameras).

The way to get Metadata in Milestone is through the Bosch Enhanced Metadata Plug-in

This is a comprehensive reference for diagnosing and resolving common issues with Infrared illuminators in security systems.

Preventing condensation on security cameras is crucial because it can obstruct the camera's view, affecting its ability to capture clear footage. Over time, moisture build-up can potentially damage the internal components of the camera, affecting its functionality and lifespan

This article provides possible causes and solutions regarding FLEXIDOME Inteox 7100i (CPP13) - calibration lost using FW 8.45.0032.

The configured camera TCP port is used from the BVMS Operator Client to the camera. This port is used by the BVMS Operator Client as a destination port. The source port is dynamic and therefore, it cannot be adjusted.

Milestone search tools (People & Vehicles) find results for other cameras. But the Bosch Forensic Search Agent finds zero results for DINION IP starlight 7000 FW v7.89. Why?

Yes, it is possible to do this setting (minimum TLS) to multiple cameras at once in Configuration Manager. You can do this change after you authenticate on those cameras. Learn more!

Hash Tag "#" is one of the few special characters, which is accepted by the camera, but it cannot be accepted on BVMS side (in order to connect to the camera) — due to the limitations of communication specifics some BVMS components are using. And as a result, communication might not work properly and "No connection" warning message in Operator Client image pane and black screen might occur

You have to make sure that you are not using HTTP. This is an insecure protocol and we recommended to disable HTTP because it will lead to vulnerability scan results.

Global VCA under the VCA task in Configuration Manager is used from default on the camera (with no specific configured VCA Rules). VCA Profile: Global (from Positioning) is used to set the same height of the camera for all VCA profiles.

If you will try to use these languages as name stamp for Bosch cameras, it will display squares or not the word/s itself at all. This is not a bug or a fault, Hebrew & Thai characters are not available for the on-screen display.

WD MSD-064G IP SECURITY MICROSD CARD does not support lifespan check for Bosch CPP4 cameras

The information regarding the ports can be found in BVMS – Configuration Manual (page 366), should the customer use BVMS as a VMS.