Security: Video

This article provides a solution to the intermittent focus issues for MIC 7000i series and for the Optical video in the MIC 9000i

The MinIris and MaxIris values could be configured when the camera is mounted and installed in specific lighting conditions.

This article explains how to fix the behavior of MIC IP 7000i/9000i Bosch camera when is out of focus during a rapid zoom

See what you can do when MIC 7000i with FW 7.72 shows blurred images. After restart, the quality of the image is good for a short time, but the issue reappear.

This guide is meant to explain how to enable the appropriate debug commands for logging during random reboot situations, and which logging to collect for troubleshooting, as in general there are multiple triggers that can cause a device to reboot. The information gathered will help to analyze the root cause.  Please make sure that all of the logs collected cover the same time period.

The Bosch camera can make up to two (2) recorded tours. A recorded tour saves all manual camera movements made during the recording, including its rate of pan, tilt and zoom speeds, and other lens setting changes.

If you want to disable the digital zoom or to limit the maximum zoom-in of the AUTODOME IP starlight 5100i IR camera, you can do that by using the AUX Command 80 (OFF).

Find out from this article what should be done when the MIC IP STARLIGHT 7100I cameras pan but do not tilt

The “inactivity” algorithm from this article will move the camera to Pre-position 99 in the Alarm Task scripting.

"Show VCA items" is a function which works in Internet Explorer 11 with the Bosch MPEG ActiveX installed. Due the end-of-life of Internet Explorer, this function is no longer available on Microsoft Edge.

Are you looking for the MIC IP fusion 9000i Wiper/Washer RCP command syntax to incorporate it in the third party software?

By checking the Zoom threshold box you will select the current zoom position at which the mask will appear as the camera zooms in or be hidden as the camera zooms out.

This article explains how you can prevent the privacy mask from moving down and up when zooming in and out for AUTODOME and MIC cameras.

The 95 W midspan is a high-power PoH (Power Over HDBase T) device that provides data and power between an Ethernet switch and an IP camera.

Follow this article to avoid getting the message: “Changing orientation is not possible because of the mounted illuminators”.

If cleaning the bubble is required, use the following procedures and comply with all the warnings listed in this article.