Security: Video

The purpose of this article is to assist you with the creation of mirrored drive sets in a DIVAR IP all-in-one 5000 Recording Appliance.This procedure should be performed on new appliances that have not yet been deployed.

Place the script from this article in the alarm task editor and save it.

If you forgot the password of your Bosch IP recorder and you want to reset its password, the Central Technical Support Team can help you.

Remote VCA configuration through the camera's device page (website) now can be performed with Bosch Configuration Manager version 7.60 and later.

If you use the firmware files that are dedicated to a certain CPP platform, then you will need to select simultaneously only the cameras with the same CPP platform.

When looking at the live view via browser (Dewarped view mode) of FLEXIDOME panoramic 5100i IR camera, the ePTZ controls work only for the 1 top left cameo. This article provides causes and solution regarding this situation. 

Regular BVMS 12.1 installer will not run on any DIVAR IP all-in-one platform. The upgrade shall be performed via DIVAR IP System Manager application. Usually, we recommend to upgrade BVMS in steps. Each version should not be more than ~two years apart. This prevents potential issues in the upgrade process.

The MBV-MBase is the license that allows you to extend the SMA in Remote Portal. You receive this license when you place an order to Order Desk for SMA extension and it must be activated in the Remote Portal and on the server like any other license.

New check in BVMS Configuration Client has been implemented, which blocks the disabling of the "Secure connection" if camera port 1756 is disabled. This should prevent the camera from getting "unreachable" by miss-configuration of the administrator. 

Connections and programming for VIP X1XF and VG5 600 Dome.

This article informs you about the way of working of the Central Technical Support when you contact them regarding your faulty  Bosch Security Systems device. 

VIDEOJET decoder 3000 is only capable of decoding H.264 video.

To change the camera name in Remote Portal, you need to change the camera's Device name and then re-register the camera to Remote Portal.

This article explains how you can change the IP Matrix Passcode PIN when using Configuration Manager version lower than 7.50 & VIDEOJET decoder 7000 (VJD-7513) FW version lower than 10.22.

  What does mean the clock symbol showed in the Operator Client Logical tree?

This article explains how to use the settings as per the devices current configured capabilities if you just added a device to BVMS, you get the possible stream options as per a “Config table” known to BVMS.

You can collect Service logs from the unit using two methods. Both methods will save the service logs as a password protected ZIP file ( Example: ServiceLog-XXXXX.zip ).

In this article you will find the ports which are used for Remote System Management

This article contains a step-by-step guide related to updating process of the E-Series controller firmware

Check this article and find out if you can add and see a BVMS 11 system running on a DIP in MVS webpage as unmanaged site