Security: Video

Based on the symptoms of no steaming video, a blank diagnostic log and the message below in the logs, there could be a few possible problems. These would be internal hardware issues.  

This article contains the information about the default path where  the recordings of Bosch Video Client are set.

If you want to reinstall your unit with unconfigured HDDs and the RAID is not created yet, follow the steps from this article.

This article shows what to do in case the following message occurs: "Could not add the following devices"  when adding IP cameras FW 7.87  to BVMS 12.0.

This article shows how to configure Input Alarm and later search for them in the Event search using Web Interface.

This article explains what action should be done for DIVAR IP 7000 Gen 3 before collecting IPMI logs

In principle, the Autodome starlight 5100i IR camera (NDP-5523-Z30L) may only be operated with switches, midspans or PoE injectors that meet the EEE802.3bt standard! - Or use 24VAC.**

Is DIVAR IP 6000 R1 compatible with VRM v.3.83.0021 (64-bit) and BVMS Viewer 10.1?

Intelligent Insights support controlling Bosch IP cameras by Common Gateway Interface (CGI) commands over HTTP or HTTPS when a threshold of the area fill level, area fill level traffic light or occupancy use case is reached. Follow the step-by-step guide below and find how you can to setup the threshold actions in Intelligent Insights.

In this article you can find the actions you need to do in order to solve the zoom speed for AUTODOME NDP-7512. A customer could observe a difference in zoom speed in comparison to the previous generation

The "User Manual Bosch AI Alarm Verification Plugin for Milestone XProtect" is a comprehensive guide designed to assist users in integrating and utilizing the Bosch AI Alarm Verification Plugin with the Milestone XProtect video management system.

You can try the steps explained in this article to create a Task using Task Scheduler from MS Windows

Find out from this article what can be done when your HP Z2 with Windows 10 LTSC 2021 and Nvidia driver has black screen (workstation does not boot up). The secure boot does not recognize this as a valid UEFI combination of OS & video board and blocks the booting.

This article provides an answer if the  an OS upgrade to Win2016 can be performed on old DIP 3000, DIP 6000 or 7000 R1.

When smoke or fire is been detected, AVIOTEC will sent a Smoke/Fire event to the Alarm Management and at the same time trigger it’s output.  Using this output status, we are able to trigger the Alarm Management.

This article gives you more information about FLEXIDOME IP starlight 8000i camera streaming capabilities.

This article explains how to configure a single camera that already has a fixed IP address assigned, using Project Assistant App.

The "Import" icon may be missing from table view in Configuration Manager, version <7.50. Therefore, we recommend to update the Configuration Manager to v7.50

Find out from this article how does the ‘Active profile’ work for Flexidome Multi 7000i camera

With the DSA E2800 Bosch introduced Multipathing. It is a fault-tolerance technique that defines more than one physical path between the camera and its iSCSI storage devices through redundant network connections. When using this feature, recording of video data and replaying video data is possible even in case of an iSCSI controller failure. To ensure also that outages of infrastructure equipment (e.g. Switch) could be covered, we recommend following Interconnection.