Security: Video

This article shows from where can I find my Bosch Remote Portal ID.

When it comes to maintaining your system uptime, you absolutely have to know when there's a problem, no matter where you are or the time of the day. Therefore, this article helps you learn how to enable Remote Alerts, if something happens on the site and you are not on it.

Health monitoring with Remote System Management is very easy, as in one page you have an overview of the state of all DIVAR IPs connected to your Remote Portal and then, drilling down a level, you have an instant overview of the state of the cameras connected to the selected DIVAR IP. A service is available to setup health alerts for devices via email, so you are informed when any emergencies pop up.

If for any reason, later on the DIVAR IP needs to be removed from Bosch Remote Portal connected via System Manager, follow the steps from this article.

This article shows the blueprints for the three operation modes that the DIVAR IP supports, combined with Remote System Management. They show the capabilities and limitations of Remote System Management in each of the modes.

With the release of System Manager 2.0, the DIVAR IP systems can now be connected to the internet for maintenance and management, using Bosch Remote Portal.

Bosch's Remote System Management service allows you to leverage the power of the Internet of Things (IoT) to provide secure, transparent, and cost-effective asset management throughout the lifecycle of a video system. This service enables end users, system integrators and installers to perform inventory and update management, as well as health monitoring tasks for an entire Bosch video system (DIVAR IP + BVMS + cameras) from one centralized Remote Portal platform.

This FAQ article contains a lot of questions and answers related to Bosch Remote System Management service 

This article lists different ways to connect to cameras Live/Playback using the Video Security Client/App: to DIVAR IP AIO/BVMS system or to Camera directly, bypassing DIVAR IP AIO/BVMS system.  

License expansions missing after upgrade to BVMS 11 in Remote Portal. Only 1 x MBV-XCHANPLU license activated instead of 16 x MBV-XCHANPLU. What to do?

This article explains how to proceed when you want to register a camera to Bosch Remote Portal and the client’s network is restricted.

Possible causes and solution(s) Cameras which get connected from the customer's site to Bosch Remote Portal use an outgoing connection via TCP port 42000. Outgoing connections usually are not blocked by a router, however in a corporate network with proxy server, firewall, etc. involved, the IT department might open the needed ports. The troubleshooting steps below might help you to connect cameras to Bosch Remote Portal.   Known issues on camera commissioning In most cases when camera commissioning fails, the root cause is: No connection to Bosch Security Cloud from the customer’s site Blocked Internet connectivity (e.g. blocked ports by proxy or firewall) User belongs to more than one Company in Remote Portal The camera is already commissioned to a different cloud instance Known camera firmware issues Known camera date issue Further…  

This account has been locked because of too many failed login attempts. Try again in 39 seconds.

This article explains how to connect an INTEOX camera to the S&ST ecosystem using Configuration Manager (7.20 and later).

If you are trying to connect your device to the Remote Portal and it says that server is unreachable, please check the firewall blocks and whether certain ports are not blocked.

Does the video stream (from camera to client) remain only on the LAN? Or, does the video stream need to first process 'through' the cloud?

Camera Counter Reports are available on Bosch IP cameras capable of Essential Video Analytics or Intelligent Video Analytics, which are connected directly to the Remote Portal.

To change the camera name in Remote Portal, you need to change the camera's Device name and then re-register the camera to Remote Portal.

Remote Portal's Remote Connect service allows connection to your devices through the Remote Portal with your client software, such as Video Security Client and Video Security App.

Follow these steps if you need to configure your DIVAR IP 2000/ 5000 to be accessed through the Video Security App via Bosch Remote Portal.