This article provides a step-by-step guide about how you can disable UPnP of Bosch IP cameras & multicast scan from Configuration Manager.
One of the reason why UPnP (Universal Plug and Play) is enabled in our devices is because ONVIF uses this to scan the ONVIF device in the network.
Which .NET Framework version is required for Configuration Manager v7.30?
.NET Framework is the original implementation of .NET. It supports running websites, services, desktop apps, and more on Windows.
The system requirements for Configuration Manager state .NET 4.7.2 as necessary to be installed.
.NET 4.7.2 is considered an operating system component under responsibility of Microsoft.
If you operate in an offline CCTV network environment, please make sure that you have the .NET Framework 4.7.2 downloaded with the Configuration Manager v7.30 installer. Otherwise, the message below might appear and if you don’t have internet access you will be not able to use CM v7.30
Configuration Manager v7.30 installation package does not provide .NET Framework 4.7.2.
This guide is meant to help you adding new cameras in VRM in Configuration Client and display their images in Operator Client.
Before adding a new camera there are a few things that need to be taken into consideration:
You are not exceeding the maximum number of channels allowed. Each unit has a maximum number of channels. For example:
DIP 5000 AIO the maximum number of channels is 42
DIP 6000/ 7000 AIO the maximum number of channels is 128
You have the neccesarry number of licenses installed on the system
The units come with 8 channels pre-licensed. If you want to add more cameras or encoders/ decoders, you need first to make sure that licenses have been purchased.
The system has enough storage to cover the retention time of the cameras. If there is no storage available, there is a risk that your system will stop recording.
The bandwidth available of the unit is not exceeded. For example:
Bandwidth DIP 5000 AIO: 170 Mbit/s
Bandwidth 6000/ 7000 AIO: 550 Mbit/s
PC/ Server/ Workstation
Check if your system is performing correctly!
The VRM Monitor is one of the best options to check if the system is recording correctly, providing a quick overview as well as detailed information about all the cameras and storage added to VRM.
In this article you are going to see how to access VRM Monitor from Bosch Video Management System (BVMS) Configuration Client. Furthermore, you will find here some useful information about each section on the Dashboard page.
The BVMS Project Checklist is an Excel-based tool which makes it easier to design a BVMS system.
This article describes how to use the project checklist.
Pick the attachment you need, depending on the version of BVMS you have
With the VRM eXport Wizard 2.0 encrypted and unencrypted VRM recordings can be exported (VRM block export) from any video surveillance system based on Bosch Video Recording Manager (VRM) and exported recordings can be converted to mp4-files. Therefore, the VRM eXport Wizard 2.0 offers the following two options, compare also Figure 1:
Export VRM recordings of cameras
Convert already exported data to mp4-file
This article describes how to configure a generic Microsoft Windows Server (2012 R2, 2016 or 2019) based server to serve as an iSCSI target for a Bosch video surveillance environment.
SCSI (Small Computer System Interface) is most commonly used for the communication between computers and peripheral devices, such as hard drives.
iSCSI enables devices to use SCSI over a network interface, therefore it makes a lot of sense for cameras to use iSCSI to record video.
The camera is a small computer that needs a (network) connection to a "hard drive" to store video footage. In other systems this job is performed by the network video recorder (NVR).
In many cases a minimum and maximum retention time needs to be defined in a video surveillance systems due to legal requirements. While the minimum retention time defines the time period for how long video recordings need to be stored, the maximum retention time defines after which period of time the recordings have to be deleted. Thus, the minimum retention time is going to influence the amount of storage needed. The higher the minimum retention time the more storage space is required.