Security: Video

As video surveillance use grows in commercial, government and private use cases, the need for low-cost storage at scale is growing rapidly. BVMS, Bosch cameras, HPE hardware and SUSE Enterprise Storage provide a platform that is an ideal target for recording these streams.

Use the Project Assistant to its full extent and once the cameras are connected to the target network, perform a network scan using the BVMS Configuration Client

This articles describes how a BVMS system meets the requirements specified by IEC62676-1.

Find out from this article what you should do to fix green Image panes in BVMS

Find out from this article what to do when installing Configuration Manager v6.20.0102 on Windows 10 and error message is received during installation of .NET Framework v4.7.2

The calculation of the storage capacity is done in different way in Configuration Client and VRM Monitor. Check this article and find useful details!

This article contains the information about the default path where  the recordings of Bosch Video Client are set.

BVMS OPC server restricts the use of some symbols in the camera names

The UDP tunneling cannot be configured on BRS. Network cards are grayed out.

This article is a step-by-step guide about Video View License activation process.

This article presents which are the new features in Video Security 3.4 for Windows, Android and iOS.

Follow this article and download the Bosch Data Security Guidebooks attached

This article shows what to do in case the following message occurs: "Could not add the following devices"  when adding IP cameras FW 7.87  to BVMS 12.0.

DIP AIO 5000 is compatible with BVMS 11.1.1. The upgrade should be done in steps as described within this article.

At some point, the Central Technical Support team could ask you to provide them with a Configuration Manager table view export, for further investigation of your devices, such as a full overview of the installed cameras or with the cameras with a specific problem. This article will help you to learn how to do this export.

When logging into BVMS Operator Client, there is an alarm showing up: “System Error - Server alarm queue capacity reached”. Find out from this article what could be the cause and how to solve this.

You can lock the control of a PTZ camera for other users. A user with a higher priority can take over the control and lock the camera control. A timeout can be configured for this explicit PTZ locking. If you only take over the control without manually locking it before, the control is locked for the user with lower priority for 5 seconds.

The alarms appear, the forensic search is working fine, but the yellow lines don’t appear on the recording line/ timeline. What to do to display the yellow lines in timeline?

If you would like to exclude certain Events and Alarms from being written in the BVMS logbook you do have the option to exclude such information.  

This FAQ article will answer to the question of possibility to upgrade an existing BVMS Pro system to a BVMS Enterprise system