Security: Video

This technical note summarized the different integration possibilities available today and the clients supplied by Bosch.

This article describes how to benchmark Video Analytics and differentiate video analytics solutions.

This article describes which camera settings influence the performance of Essential or Intelligent Video Analytics in Bosch IP cameras, and what the best practices are.

This article describes idle and removed object detection with Intelligent or Essential Video Analytics in FW 6.30, how to configure it and what the limitations are.

This article describes the camera tamper detection options available with FW 6.30: Scene too dark / bright, global change, reference image check.

The article describes how to track ships using Intelligent Video Analytics with FW 6.30, how to configure this and what the limitations are.

The museum mode of Intelligent and Essential Video Analytics is an optimized tracking mode to detect whenever someone tries to reach towards and touch a valuable asset like a museum exhibit. It can also be used in any other application where approaching a sterile zone from a more crowded environment shall be detected.

This article describes how to configure the Map-based calibration and Geolocation in different calibration methods

This article provides an overview of object classification, describes how to configure it and what the limitations are.

Never lose track of an object of interest! Intelligent Tracking automatically zooms in to and follows a selected Intelligent Video Analytics object as far as possible with the camera.

When camera is set to auto track (by web interface) to "auto"-> IVA is detecting an object but camera is not following. Auto tracking works and metadata is displayed only on a stored preposition.

In this article, you will find such an automation process between Bosch Cameras and Advantech Adam I/O devices.

Do you want to configure Video Content Analysis of your device and "VCA: Authorization required" message is displayed in Configuration Manager? Find out here why this message is displayed and what you should do to fix it.

The choice of the tool depends on the way the camera and recording are managed.

This article describes the absolute minimum information we need in order to start analyzing and optimizing Video Analytics performance

This script will make your encoder to toggle relay 1 only when IVA rule #1 alarm is active.

Related Products: Configuration Manager 7.00 and above. This article shows how to use recorded video in Configuration Manager in order to calibrate a camera and to configure a task.