Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    ‎04-05-2021 11:53 AM
    In order to use the software modules, the software needs to be licensed and to receive licenses for the software, the keys need to be registered online. This article explains how to license a system that runs in full Bosch Video Management System (BVMS) mode with help of Security Systems Software License Manager tool (SLMS).
    View full article
    100% helpful (1/1)
    ‎04-05-2021 11:51 AM
    Check if your system is performing correctly! The VRM Monitor is one of the best options to check if the system is recording correctly, providing a quick overview as well as detailed information about all the cameras and storage added to VRM. In this article you are going to see how to access VRM Monitor from Bosch Video Management System (BVMS) Configuration Client.   Furthermore, you will find here some useful information about each section on the Dashboard page.
    View full article
    ‎04-05-2021 11:50 AM
    How the video stream management works when using the Remote Portal connect feature? Does the cloud-service simply initiate the connection between device and client, or throughout the video stream as well?  For example: Assuming a Remote Connect, the camera is viewed by Video Security App (connecting via Remote Portal) — but physically connected via a local WiFI (LAN).  Does the video stream (from camera to client) remain only on the LAN? Or, does the video stream need to first process 'through' the cloud?
    View full article
    100% helpful (1/1)
    ‎04-05-2021 11:49 AM
    This article aims to define the way you can display camera video via decoders. Moreover, fifteen different settings scenarios and their effects will be outlined for the live video to be displayed through the decoder. Article requirements: BVMS Camera Decoder
    View full article
    ‎04-05-2021 11:47 AM
    Question Does DINION IP thermal 8000 support privacy mask? Answer According to the Operation Manual, the privacy mask is available only on some cameras, but as you can see on the picture below, the DINION IP thermal 8000 camera supports privacy mask: Privacy masking is used to block a specific area of a scene from being viewed. Eight privacy mask areas can be defined. 1. Select the pattern color for the masks. 2. Select the mask you wish to define in the drop-down box. 3. Check the enabled box to activate the mask. 4. Use the mouse to move the mask; drag the corner points to resize. 5. Click Set. 6. To remove a mask, select it and click the waste bin icon. Note: To add an additional adjustment point to the area, double-click on a side.
    View full article
    ‎04-05-2021 11:44 AM
    Question: DIVAR network 5000 / DIVAR hybrid 5000   support configuration of 3rd party cameras through the ONVIF Profile S protocol. Let's suppose that y ou have  ONVIF cameras connected to a DIVAR network 5000 / DIVAR hybrid 5000  on your site  and you are using Bosch Video Management System   (BVMS) Viewer. Can BVMS Viewer monitor those cameras at the same time?
    View full article
    100% helpful (1/1)
    ‎04-05-2021 11:42 AM
    "How can I add an NVR in BVMS Viewer via DNS?" This question of our clients is more and more often encountered by the Central Support team. Here you will find the answer and recommendations of our experts .
    View full article
    ‎04-05-2021 11:40 AM
    Question How to move the Bosch PTZ camera to a specific pre-position during inactivity? Answer This can be done via alarm task scripting. The “inactivity” algorithm below will move the camera to Pre-position 99 in the Alarm Task scripting. In this way, you can use the Pre-position 1 for other surveillance purpose.
    View full article
    100% helpful (1/1)
    ‎04-05-2021 11:39 AM
    Do you want to configure the 3rd party iSCSI storage with different LUNs for recording more cameras without Bosch VRM? This article explains you if this application is supported.
    View full article
    ‎04-02-2021 05:35 PM
    This recommendation could be applied if the storage is overloaded, as there are several Onvif cameras running through it.
    View full article
    ‎04-02-2021 05:32 PM
    After clicking the   Forensic Search button   in Bosch Video Management System (BVMS) - Operator Client,   "Video image is not available" message is displayed. What could be the reason?
    View full article
    100% helpful (1/1)
    ‎04-02-2021 05:31 PM
    You may have installed Configuration Manager on your PC, you tried to run it but the software no longer works. What could be the reason?
    View full article
    ‎04-02-2021 05:29 PM
    Load balancing is provided with respect to the bandwidth and the number of iSCSI connections and is configurable per IP address ( iSCSI target). For example: Load-balancing parameters are optimized for the DIVAR IP 5000 default configuration (JBOD). When running DIVAR IP 5000 in RAID 1 mode, load-balancing parameters may need adaptation in BVMS. Navigate in the device tree of BVMS Configuration Client to VRM devices > Local VRM > [Context Menu of the storage expansion] > Load Balancing ***Soft limits is an estimation of 20% base on hard limit value ** Note: Soft Limit not requires since 3.00.x   DIVAR IP all-in one: 5000: The DIVAR IP all-in one 5000 is a RAID 1 and JBOD supported small tower office server for up to 42 channels with 4 internal HDDs and a maximum storage capacity of 48 TB.  7000 2U: The DIVAR IP all-in-one 7000 2U is a RAID 5 and RAID 6 supported 2U rack appliance for up to 256 channels with 8 internal HDDs and a maximum storage capacity of 96 TB. 7000 3U: And the DIVAR IP all-in-one 7000 3U is a RAID 5 and RAID 6 supported 3U rack management appliance for up to 256 channels with 16 internal HDDs and a maximum storage capacity of 192 TB.    Nice to know: For a better understanding of the use of our Bosch products, we encourage  you to join our online Trainings from Bosch Building Technologies Academy When completing the Training Plan you will be able to register for a Expert Level classroom Training offered in different countries across the globe! From our online trainings you can find out: How to license a system that runs in full BVMS mode How to check the health of the system ✔️ System recovery ✔️ Replace a hard drive ✔️ Setup SNMP traps in BVMS ✔️ VRM monitor ✔️ Upgrade using Software Center And many other useful information
    View full article
    100% helpful (1/1)
    ‎04-02-2021 05:27 PM
    PTZ camera (Autodome IP starlight) doesn't move in Pan or Tilt direction. This is a basic troubleshooting guide that will help you to fix this issue.
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist