Security: Video

The LTC keyboard is conceived for analog systems, where you have a monitor and you add a keyboard for control and connect it directly to the camera.

This article explains how you can solve the situation when Config Client shows Access denied message under the Physical capacity field, when trying to access the DIP-7000 AIO.

There is no need to disable UDP encryption on FLEXIDOME multi 7000i camera.

This articls provides the steps to update a DIVAR IP system. The firmware version 3.180.05-1562 can be used with the LSI MegaRAID Controller. 

Remote Connect service allows the Customer users to display cameras on Remote Portal Viewer on Video Security App and Video Security Client.

The USB driver has a different letter than E:\ and DIVAR IP Software Center seems to look only in this root, in fact it doesn't find the new software.

The IP camera address is always the key if you would like to monitor or remote viewing it. Like any network device, the camera is assigned an IP address when it is connected to the router with Internet access and powered on. Here we will introduce 3 ways to find the network camera IP address quickly and easily.

The DIVAR IP units are prepared from production to use at first setup the port 8454.

To be able to deploy a camera with DHCP disabled to Bosch Remote Portal, please perform the steps from this article.

The Administrator can create groups and even nested groups to organize devices in Remote Portal

This article describes how the GDPR impacts video surveillance systems and how BVMS can be configured to function in a GDPR compliant organization.

Bosch has implemented the ONVIF Profile M with MQTT support in its cameras (CPP6, CPP7 and CPP7.3) in the firmware 7.81.0060 and above.

This article describes how the integrity of BVMS software can be checked.

This article illustrates how to avoid timeouts in the "jump to next"/"jump to previous" functionality for recordings in Bosch VMS Operator Client..

This only happens when you perform the export in BVMS Operator Client.

This is the old way as for Project Assistant versions < 1.3.

This article provides an overview of object classification, describes how to configure it and what the limitations are.

This article explains how you can change the IP Matrix Passcode PIN when using Configuration Manager version lower than 7.50 & VIDEOJET decoder 7000 (VJD-7513) FW version lower than 10.22.

Use the keyboard connection on the back of the unit to connect a Bosch Intuikey keyboard using one of the following methods.

This camera does not have the auto-focus functionality in the same sense as Autodome / Mic cameras.