Security: Video

Before using the App please make sure that you have configured the Passwords, users and ports on your DIVAR and the same data is entered in the App.

This article describes how Streamlining works and how it can be finetuned.

Welcome to the 3.5 release of Video Security for Windows, Android and iOS. There are new features in this release, some of the highlights are explained within this article.

This article explains how you can use and set-up dewarping on the FLEXIDOME panoramic 5100i and FLEXIDOME panoramic 5100i IR cameras (edge dewarping).

This article provides the step-by-step procedure on how to configure “BVMS” presets and save views.

In this section you can find details on what information is required during the troubleshooting process to successfully identify a unit in terms of model number, firmware version and unique identifiers. What is also very important always for the troubleshooting is the DIVAR Service log. In addition to that, in some situations network captures from the DIVAR may also be required.  

This article lists the initial troubleshooting steps and concrete instructions for collecting logging for issues with ONVIF cameras, added to BVMS system. We will classify the different issue scenarios one can have using ONVIF cameras in BVMS system. Depending on the issue the article lists the required logging to start initial troubleshooting.

This article describes how you can upgrade a BVMS license to a higher version via Bosch Remote Portal. ( eg. from BVMS 11.0  to BVMS 11.1.x )

Do you want to configure the 3rd party iSCSI storage with different LUNs for recording more cameras without Bosch VRM? This article explains you if this application is supported.

This article describes the mechanism of ANR 2.0 and how it can be set up. In the following ‘camera’ is used as a representative for all video source devices supporting ANR 2.0.

Follow this step-by-step guide and learn how to configure RAID 5 on your DIVAR IP AIO 7000 GEN3.

This article provides you the solution when the MIC IP starlight 7100i camera wiper stops on the screen. Furthermore, you will learn how to perform a physical reset of the camera.

The “inactivity” algorithm from this article will move the camera to Pre-position 99 in the Alarm Task scripting.

In this article you will find all the steps of the process to recover the DIVAR IP AIO 4000 or 6000 to factory defaults.

This article presents which are the new features in Video Security 3.4 for Windows, Android and iOS.

In this article, the technology behind IVA Pro Buildings, IVA Pro Traffic and IVA Pro Intelligent Tracking will be explained, as well as the differences between each other, and towards the more traditional IVA Pro Perimeter and classical IVA.

This information may be requested by Central Support Team, as the bundle file is useful for troubleshooting the improper behavior of the unit. This method provides the steps for collecting the NetApp DSA E2800 support bundle.

The present document is intended to provide information on the VRM camera replacement functionality in the Bosch Video Management System (BVMS), as well as guidance through the process

Depending on the FW version of cameras and BVMS version you have installed, different possible situations can occur such as: the cameras are not working because the firmware is old, Configuration Client will display a message like: "unknown platform", Gaps in recordings or not recording at all and so on

This article contains all the steps to restore DIVAR IP 7000 R2 to factory default. Note: By performing the Initial Factory Setup on the system, ALL DATA from the ENTIRE system will be erased.