Security: Video

The Embedded Login Firewall of all Bosch IP cameras, introduced with firmware version 6.30, consists of a two-level system which makes use of two integrated functional modules.

Camera Counter Reports are available on Bosch IP cameras capable of Essential Video Analytics or Intelligent Video Analytics, which are connected directly to the Remote Portal.

This article provides you with the available options, services and licenses in Bosch Remote Portal for Bosch IP cameras.

Find out from this article which Bosch encoders and decoders are compatible with BVMS

The wiring and installation details in this guide are based on common practices used at sites to ensure proper surge and lightning suppression.

MQTT is a Client Server publish/subscribe messaging transport protocol.

The "Import" icon may be missing from table view in Configuration Manager, version <7.50. Therefore, we recommend to update the Configuration Manager to v7.50

This article answer how the DIVAR network or hybrid UHD monitor setting cause black screen when UHD not supported After changing the resolution of monitor to UHD (3840*2160), the attached monitors results always black.

This only happens when you perform the export in BVMS Operator Client.

This behavior was improved with the release of Video Security Client/App 3.2.3.

Use the keyboard connection on the back of the unit to connect a Bosch Intuikey keyboard using one of the following methods.

Find out from this article how can you avoid the MIC Inteox & Starlight 7100i camera wipers getting stuck.

Is DIVAR IP 6000 R1 compatible with VRM v.3.83.0021 (64-bit) and BVMS Viewer 10.1?

Find out from this article how does the ‘Active profile’ work for Flexidome Multi 7000i camera

If cleaning the bubble is required, use the following procedures and comply with all the warnings listed in this article.

HD Decoders are not downgrade-able lower than the factory default version. All Video Management Systems should not have issues with newer Firmware. All their implemented functions should work.

According to the BVMS 11. Release notes > 2.2. Removed functionality chapter > The digital monitor wall functionality has been removed. This removal has impact on the BVMS Viewer → Decoders are not supported anymore in BVMS Viewer starting with version 11.0 Other devices and functions that have been removed to ensure software security: Map migration (removed Autodesk design review installation) SMS gateway Dibos/ BRS Note: The Monitor Group functionality is still available in BVMS Professional/ Plus/ Lite.

Follow this article to find out what you should check and do if your 3rd party camera is flashing between image and Bosch logo in Operator Client

With the DSA E2800 Bosch introduced Multipathing. It is a fault-tolerance technique that defines more than one physical path between the camera and its iSCSI storage devices through redundant network connections. When using this feature, recording of video data and replaying video data is possible even in case of an iSCSI controller failure. To ensure also that outages of infrastructure equipment (e.g. Switch) could be covered, we recommend following Interconnection.  

BVMS v10.1 and  BVMS v11.0 come with a checkbox where you can logon to the Operator Client with Windows Credentials. If you want to use this function, you need to set up the BVMS Configuration Client and browse the AD users-groups. Then, the users can sign in to Operator Client with their Windows-Credentials.