Security: Video

This article is applicable for all the requests related to third party products integrated in Bosch Video Management System Software over ONVIF.

This article shows how to check if particular non Bosch camera is supported in BVMS.

The following steps have to be performed in order to use an updated software installation package on a DIVAR IP all-in-one 7000 3rd generation video management appliance.

Follow this article if you have FLEXIDOME IP outdoor 5000i (FW 6.43.0027) or FLEXIDOME starlight 6000 VR (FW 6.32.0109) cameras and you would like to upgrade them to the latest version available

For larger projects, where many cameras need to be commissioned, the question might come up on how to tackle it in the most efficient way using the Project Assistant.

This article explains how you can use and set-up dewarping on the FLEXIDOME panoramic 5100i and FLEXIDOME panoramic 5100i IR cameras (edge dewarping).

In this article you will see how to import project files into Configuration Manager in both versions: v6.10 & v7.41  

This article shows how you can use the Project Assistant to remotely commission the FLEXIDOME IP starlight 8000i camera, including set up and adjustments of field of view.

This article explains how to configure a single camera that already has a fixed IP address assigned, using Project Assistant App.

This article explains how to playback the SD card recordings in Operator Client from a camera added as Local Storage in BVMS Lite 10.1

This article explains how to configure Monitor B output for Divar AN 3000-5000.

The Divar AN 3000/5000 features the ability to ping an IP address, thus allowing the technician to verify that the workstation that is to connect to the Divar can be seen on the network. Please note that this only checks the connection from the DIVAR to the Workstation. Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to the target host and waiting for an ICMP echo reply. The program reports errors, packet loss, and a statistical summary of the results.

The article describes how to receive analytic events from Bosch cameras in Milestone XProtect.

This article describes how to secure the data connection between Bosch cameras and Milestone's XProtect by the use of 'Authority-signed Certificates' 

This article describes how to use Milestone's PTZ  "Home" position with Bosch PTZ cameras.

Flexidome 8000i or other future cameras with WLAN option enabled (default ON) in an IPv6 network environment: no IPv4 possible. What to do?

Follow the steps from this article and find out how you can license BVMS Viewer v.11.0  or above for free.

If you are still using BVMS version <9.0 and you want to replace a faulty device without loosing recording, please follow the steps below.

Note that this procedure applies only from VRM version 3.10 onwards.

Dinion IP starlight 6000 HD/ Dinion IP ultra 9000 MP is a fixed camera, not a PTZ camera. The camera is only capable of e-PTZ (Electronic Pan, Tilt and Zoom).