Security: Video

This article provides causes and solutions regarding the error code 49 Invalid Credentials when trying to login to LSA management software.

This article explains that by pressing ALT+TAB  it is possible to return on the kiosk mode from DIVAR IP System Manager without the need of restarting the unit.  

If you suspect that your hard drive has failed and you are contacting the Central Technical Support team, please first consider the mandatory information listed below, which must be provided to them.

If you cannot access any program from kiosk mode or they are randomly opened on your DIVAR IP AIO, this happens because you double click on the icons.

This article explains what is the difference between operations mode of a DIVAR IP all-in-one 4000 & 6000.

If the IPMI default password is lost, a tool called IPMICFG-Win, available from the SuperMicro website, can be used to recover it.

RAID 5 provides basic fault tolerance with good performance, but it cannot protect against multiple drive failures. RAID 5 with a hot spare improves fault tolerance by automatically replacing failed drives, but it still has the same limitation regarding multiple drive failures. RAID 6 offers a higher level of fault tolerance by using double parity, allowing for the simultaneous failure of up to two drives without data loss. However, it has higher write overhead and requires more drives for implementation compared to RAID 5.

If you were asked by the Central Technical Support team to provide them with the Sensor readings picture during the troubleshooting process of your device, please follow the steps from this article

Importing a foreign configuration should recover a RAID configuration (in case the RAID is not corrupt) This option must be performed before creating a new VHD. This option may restore all of the video and data on the drives.

If you were asked by the Central Technical Support team to provide them with the Bios defaults picture with the Boot order of your DIVAR IP during the troubleshooting process of your device, please follow the steps from this article and find out how can you check the boot order of a DIVAR IP

To access the "Reset" options of a DIVAR IP 2000 Recording Appliance, you have to open the Appliance's "Dashboard".

The purpose of this article is to assist you with the creation of mirrored drive sets in a DIVAR IP all-in-one 5000 Recording Appliance.This procedure should be performed on new appliances that have not yet been deployed.

The haneWIN DHCP server software implements a DHCP and BOOTP server based on RFC 2131. The DHCP Server is implemented as a native service for background operation, A Control Panel applet provides interactive access to the service. The server supports automatic DNS updates for DHCP configured clients. The latest version is available and can be downloaded from here. According to the Installation Manual of the DIVAR IP 7000/ 6000: All DIVAR IP systems are preconfigured with default network, user and iSCSI settings. By default, the virtual network adapter (the two physical NIC ports are teamed by default) is configured to obtain a valid network address from a DHCP server in the local network. The haneWIN DHCP server software supports multiple address pools for dynamic IP address assignment as well as fixed IP address assignment to clients.

Find out from this article which VRM version is compatible with your DIP and what BVMS version is supported.

If for any reason, later on the DIVAR IP needs to be removed from Bosch Remote Portal connected via System Manager, follow the steps from this article.

This article shows the blueprints for the three operation modes that the DIVAR IP supports, combined with Remote System Management. They show the capabilities and limitations of Remote System Management in each of the modes.

Upon powering on the DIVAR IP all-in-one 7000 system you hear FAN spinning normal, LEDs are blinking at normal frequency and there are no error beep codes. However, there is no display when connected via VGA (or) DVI (or) DP. Check out this article and find out how to fix this!

This article describes all the steps that will help you to create iSCSI Virtual Disk/LUNs after replacing an HDD on a DIVAR IP 5000 AIO.

At startup, a black screen is showing up and it is impossible to boot into the BIOS or attempt a reset by pressing the F7 key. How to fix this?

The latest suitable Image for your DIVAR IP R2 Family Device can be obtained from Bosch Central Support Team. Please provide the SN (serial number) from the DIVAR IP 6000/7000 R2 when contacting Bosch Central Support Team.