Bosch has been providing 2 types of VRM packages: a 32bit and a 64bit version. Since VRM 3.82 we are only offering the 64bit version.
As all of our released DIVAP IP units started off as 32bit VRM which includes a Transcoder service.
Where can you find the ISO image for recovery of DIVAR IP 7000R2 and DIVAR IP 6000R2?
DIVAR IP 7000R2 and DIVAR IP 6000R2
DIVAR IP 6000 2U W/O HDD
DIVAR IP 6000 2U 4X3TB
DIVAR IP 6000 2U 8X3TB
DIVAR IP 6000 2U 4X4TB
DIVAR IP 6000 2U 8X4TB
DIVAR IP 6000 3U W/O HDD
DIVAR IP 6000 3U 16X3TB
DIVAR IP 6000 3U 16X4TB
DIVAR IP 7000 2U W/O HDD (R2)
DIVAR IP 7000 2U 4X3TB (R2)
DIVAR IP 7000 2U 8X3TB (R2)
DIVAR IP 7000 2U 8X3TB (R2)
DIVAR IP 7000 2U 8X4TB (R2)
DIVAR IP 7000 3U W/O HDD (R2)
DIVAR IP 7000 3U 16X3TB (R2)
4000GB HDD DIVAR IP 6000/7000
For recovery of DIVAR IP 6000 R2 or DIVAR IP 7000 R2 one should use only the DVD provided with the particular device.
Do not use the DVD for recovery if you are not sure that it is the one delivered with the system.
In case the DVD is lost or damaged request the respective ISO image from Bosch Technical Support.
Request the ISO image from Bosch Technical Support:
Provide the Serial Number of the device
What is the reason for the recovery
Why it is not possible to use the recovery DVD
This article will guide you through the recovery steps of a DIP:
TSG: Rebuild broken OS RAiD on DIVAR IP 6000, DIVAR IP 6000 R2, DIVAR IP 7000, DIVAR IP 7000 R2
Relates to: IP Storage/PC HW - DIVAR IP 6000 R2 and DIVAR IP 7000 R2
Both DIVAR IP units running the BIOS from American Megatrends Inc. (A.M.I)
There are PRE BOOT or POST BOOT beeps.
Please see the following Acoustic Error Codes.
The Divar AN 3000/5000 features the ability to ping an IP address, thus allowing the technician to verify that the workstation that is to connect to the Divar can be seen on the network.
Please note that this only checks the connection from the DIVAR to the Workstation. Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to the target host and waiting for an ICMP echo reply. The program reports errors, packet loss, and a statistical summary of the results.
This article will explain how to set-up the RAID quickly in order to start the "re-imaging" process from the Recovery DVD (one at DIVAR IP 6000 R2 - or two DVDs at DIVAR IP 7000 R2) enclose to each DIVAR IP 7000 R2 or DIVAR IP 6000 R2 delivery.
The MegaRAID controller will automatically detect if a disk has errors causing the RAID volume to be degraded. An error message will appear on the desktop of that system.
The system will also generate a beeping sound indicating it needs attention:
This article provides the steps to determine and replace your defective HDD in DIVAR IP R2
This article also applies when:
On the front Panel the Red LED at the HDD is on
The HDD is shown as faulty in the MegaRaid Software
Mega RAID Storage Manager
Possible causes and solution(s)
The parts included in the kit (DIP-7GRSN-P6) are the following:
1 x Graphics card for DIVAR IP all-in-one 7000 appliances
1 x Sound card for DIVAR IP all-in-one 7000 appliances
4 x Mini DisplayPort to DisplayPort adapter
The kit must contain the proper brackets for the low profile (2u) and normal mounting (3u).
At first sight, you might think that the model is the correct one that shows in the Datasheet, but the Video card is smaller than the DIP Slot.
Please note that it may be possible that:
the Audio card comes with the normal mounting (3u) bracket preinstalled and the kit contains the low profile bracket
while the Video card comes with the low profile preinstalled and the kit contains the normal mounting bracket
The video card model is the same for all types of sizes of DIP-7000 AIO.
1) Question Is it still necessary to move the jumper to disable the on-board VGA?
Answer: It is NOT necessary to move the jumper to disable the on-board VGA.
2) Question: Are BIOS changes also required?
Answer: No, as per BIOS specifications, the graphic priority should always be set to “off-board”. per default.
3) Question How can you mount the brackets?
Answer Only two screws need to be tightened.
The purpose of this article is to provide a step by step guide about how to perform backup and recovery procedures of the VRM data base in the DIVAR IP 2000 EZ Recording Appliance.
Backing Up the Working Configuration:
1.To backup the working configuration of a DIVAR IP 2000 Recording Appliance, open the Appliance's "Dashboard":
2. From the Dashboard select the "Configuration" tab in the top right hand portion of your browse: