With fw7.70 a new feature was introduced that allows you to tune the scene for Day and Night separately using 2 custom scene modes.
This article explains how to switch the scene modes Custom mode#1 & Custom mode#2 based on Day or Night for Bosch cameras
This article lists how to configure ANR feature in BVMS and how correctly to set up iSCSI and direct replay.
Configuration of ANR in BVMS system
Insert SD card into camera and power it on.
In Configuration Client, select Devices page.
Device password and CHAP password. There are two possible configuration set ups - to configure password for both device and iSCSI connection or to leave both without password. Choose and configure one of them (3.1 or 3..2).
3.1. Set device user password and CHAP password
3.2. No CHAP password for ANR
Note: Mixing the parameters between the two options 3.1 and 3.2 will lead to issues in direct replay from SD card.
Traffic detector has been developed to cope with all traffic densities up to high density like congestions and queues in front of traffic lights. It also detects non-moving vehicles and is thus applicable for smart parking. In addition to vehicles, it also detects pedestrians.
Tunnels & Highways: o Collection of traffic statistics o Detection of congestions for automatic speed signaling o Detection of wrong way driving
Intersections: o Detecting presence and volume of vehicles
Smart parking: o Detect parked cars
This article describes idle and removed object detection with Intelligent or Essential Video Analytics in FW 6.30, how to configure it and what the limitations are.
Applications: - Detect parked cars in no-parking zones - Detect blocked emergency exits - Detect the removal of museum exhibits - Detect suspiciously left packages in high-security areas - Detect idle bags in walk-through areas
Limitations: - Not available on thermal cameras - Does not work in crowds - No abandoned baggage detection - No differentiation between baggage and persons sitting or lying down - Does not work in front of moving background like wind in trees or water - Does not work during illumination changes or camera brightness adaptations
This article describes the camera tamper detection options available with FW 6.30: Scene too dark / bright, global change, reference image check.
Applications: - Detect camera blinding - Detect camera being moved away from of its view - Detect the loss of sufficient overall illumination - Detect idle / removed objects, e.g. objects in front of an emergency exit
Limitations: - Not available on thermal cameras