Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    100% helpful (3/3)
    ‎10-26-2021 11:00 AM
    Find out from this article which Bosch encoders and decoders are compatible with BVMS
    View full article
    ‎10-26-2021 10:10 AM
    The method from this article shows you how to generate an updated certificate for Bosch IP Camera's and VRM Servers
    View full article
    ‎10-26-2021 10:04 AM
    Operator Client helps you display the original full image circle of a panoramic camera, its image dewarped or you can select a point of interest of the image.
    View full article
    75% helpful (3/4)
    ‎10-26-2021 09:51 AM
    The Release Letter for CPP 7.72.1118 provides information about the dependencies between firmware versions for a better understanding of the upgrade process of devices with older firmware.
    View full article
    ‎10-26-2021 09:43 AM
    Using power devices that are not listed for this product in the datasheet might result in power failure.
    View full article
    ‎10-26-2021 09:37 AM
    Find out from this article how to pass a special connection string to request a multicast stream via RTSP from a BOSCH IP camera or IP encoder.
    View full article
    100% helpful (1/1)
    ‎10-21-2021 04:13 PM
    If you have CPP4 cameras with 6.11 firmware (FW) version and you need to upgrade them to the latest version, normally you have to upgrade to an intermediate firmware version first. But where you can find this firmware ?
    View full article
    ‎10-21-2021 03:54 PM
    Question   What should you know about SNMP and Bosch cameras SNMP support?   Answer   This article explains briefly the basics of SNMP. Declares the basic terms of the protocol. It also explains what part of the protocol is supported by Bosch cameras. Basics of SNMP and terms. Simple Network Management Protocol (SNMP) is a common protocol to monitor the health  status of a system. Such a monitoring system typically has a central management server that  collect all the data from the system’s compatible components and devices.  SNMP provides two methods to gain the system health status: –The network management server can poll the health status of a device via SNMP requests. –Devices can actively notify the network management server about their system health status in case of error or alarm conditions through sending SNMP traps to the SNMP server. Such traps must be configured inside the device. Details how to configure Bosch camera to send SNMP traps - How to activate the SNMP and configure sending SNMP traps from Bosch cameras?   SNMP also allows configuration of some variables inside devices and components. The information, which messages a device supports and which traps it can send, is derived from the Management Information Base, the so-called MIB file, a file that is delivered with a product for easy integration into a network monitoring system. There are three different version of the SNMP protocol: –SNMP version 1 SNMP version 1 (SNMPv1) is the initial implementation of the SNMP protocol. It is widely used and has become the de facto standard protocol for network management and monitoring. But SNMPv1 has become under threat due to its lack of security features. It only uses ‘community strings’ as a kind of passwords, which are transmitted in clear text.Thus, SNMPv1 shall only be used when it can be assured that the network is physically protected against unauthorized access. –SNMP version 2 SNMP version 2 (SNMPv2) included improvements in security and confidentiality, amongst others, and introduced a bulk request to retrieve large amounts of data in a single request. However, its security approach was considered way too complex,hindering its acceptance. Thus, it was soon pushed out by version SNMPv2c, which equals SNMPv2 but without its controversial security model, reverting to the community-based method from SNMPv1instead, similarly lacking security. –SNMP version 3 SNMP version 3 (SNMPv3) mainly adds security and remote configuration enhancements. These include improvements on confidentiality by encryption of packets, message integrity and authentication. It also addresses large-scale deployment of SNMP.   Bosch cameras SNMP To check what SNMP version does a particular camera support, check the data sheet of the device. (Find it under your device in the product catalogue - https://www.boschsecurity.com/xc/en/product-catalog/) since FW 6.40 onwards Bosch devices support SNMP v1 legacy and SNMP v3  
    View full article
    ‎10-21-2021 03:40 PM
    First recommendation would be to configure the mode for IVA as a trigger, setting IVA as Profile 1 for “trigger off” and IVA as silent for “trigger on”.
    View full article
    ‎10-20-2021 09:37 AM
    With fw7.70 a new feature was introduced that allows you to tune the scene for Day and Night separately using 2 custom scene modes. This article explains how to switch the scene modes Custom mode#1 & Custom mode#2 based on Day or Night for Bosch cameras
    View full article
    100% helpful (1/1)
    ‎10-18-2021 11:27 AM
    This article lists how to configure ANR feature in BVMS and how correctly to set up iSCSI and direct replay.  Configuration   of   ANR in BVMS system Insert SD card into camera and power it on. In Configuration Client, select Devices page. Device password and CHAP password. There are two possible configuration set ups - to configure password for both device and iSCSI connection or to leave both without password. Choose and configure one of them (3.1 or 3..2).    3.1.  Set device user password and CHAP password 3.2.  No CHAP password for ANR Note: Mixing the parameters between the two options 3.1 and 3.2 will lead to issues in direct replay from SD card.
    View full article
    100% helpful (2/2)
    ‎10-14-2021 04:11 PM
    MTU stands for "Maximum Transmission Unit." MSS stands for "Maximum Segment Size"
    View full article
    100% helpful (1/1)
    ‎10-14-2021 04:09 PM
    This article describes the camera tamper detection options available with FW 6.30: Scene too dark / bright, global change, reference image check. Applications: - Detect camera blinding - Detect camera being moved away from of its view - Detect the loss of sufficient overall illumination - Detect idle / removed objects, e.g. objects in front of an emergency exit Limitations: - Not available on thermal cameras
    View full article
    ‎10-14-2021 04:07 PM
    This article provides a background information about syslog, tips for 3 rd party Syslog server options and step by step instructions how to configure, activate and collect the syslog.
    View full article
    ‎10-14-2021 03:59 PM
    This article  describes idle and removed object detection with Intelligent or Essential Video Analytics in FW 6.30, how to configure it and what the limitations are.   Applications: - Detect parked cars in no-parking zones - Detect blocked emergency exits - Detect the removal of museum exhibits - Detect suspiciously left packages in high-security areas - Detect idle bags in walk-through areas Limitations: - Not available on thermal cameras - Does not work in crowds - No abandoned baggage detection - No differentiation between baggage and persons sitting or lying down - Does not work in front of moving background like wind in trees or water - Does not work during illumination changes or camera brightness adaptations
    View full article
    ‎10-14-2021 03:56 PM
    Never lose track of an object of interest! Intelligent Tracking automatically zooms in to and follows a selected Intelligent Video Analytics object as far as possible with the camera. For AUTODOME / MIC IP 7000, this means automatically steering the camera to zoom in to the object and follow it. For a FLEXIDOME IP panoramic 7000, Intelligent Tracking is available in the Virtual PTZ video and steers the dewarped cut-out. For DINION / FLEXIDOME IP 7000 / 8000 cameras, Intelligent Tracking can steer a region of interest (ROI) stream. This article describes how to set Intelligent Tracking up with FW 6.30 and lists the differences based on the camera types.  
    View full article
    ‎10-14-2021 11:00 AM
    Each camera imager can be configured separately and therefore many settings can be made and checked separately. Settings in the Installer Menu can be made on a per-camera basis, including sensor mode, image rotation & lens settings with the lens wizard. Please find in this article some settings you can do separately for each FLEXIDOME multi 7000i camera imager on the camera’s web page.
    View full article
    100% helpful (1/1)
    ‎10-13-2021 02:28 PM
    Traffic detector has been developed to cope with all traffic densities up to high density like congestions and queues in front of traffic lights. It also detects non-moving vehicles and is thus applicable for smart parking. In addition to vehicles, it also detects pedestrians. Applications  Tunnels & Highways: o Collection of traffic statistics o Detection of congestions for automatic speed signaling o Detection of wrong way driving  Intersections: o Detecting presence and volume of vehicles  Smart parking: o Detect parked cars
    View full article
    ‎07-27-2021 04:56 PM
    This article explains how to integrate the Bosch MIC IP 7000 HD camera series into any existing analog CCTV system using the Bosch VIDEOJET decoder 3000. The most common integration scenarios are listed below: Simple integration using direct connectivity to analog monitor and joystick, typically found in single camera installation (for example, mobile surveillance vehicles) Integration into an existing analog matrix switcher typically found in large installations (such as for city surveillance)
    View full article
    ‎07-22-2021 01:35 PM
    An object moving or a low/ higher contrast scene can throw off the autofocus option, resulting in a soft focus or even not focus at all. Using manual focus is an obvious solution, but manual focus isn’t exactly easy to get sharp images. Manual focus requires a bit of know-how and some practice to get right. If you would like to   improve the performance   and   get a sharp image, please see below how you can manually adjust the focus ring on a Dinion Thermal camera.
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist