Security: Video

You should only subscribe directly to this article (Option 1) or to the software_release_notification label (Option 2) and you will receive a notification in your inbox every time when a new Software version is released and added to the lists within this article.

Different devices, whether cameras or encoders, offer a different amount of processing power for video content analysis (VCA).

Starting with BVMS v10.0, you can leverage VRM Encryption Technology.

Glutton (German: Vielfraß) defines and prevents a camera or multi-channel encoder from mounting and consuming  a large number of  blocks in a very short time.

During the troubleshooting process, the Central Technical Support team often needs to run several different loggers to gain a more complete understanding of the problem.  You can use custom console traces to regroup and run different loggers that are not combined in the default Server Admin list. To create and run custom console traces for Security Center, follow the steps from this article.

If replacing a defective camera, the camera must be the same IP address as the defective device, and it cannot contain a GUID from a different VRM.

The configured camera TCP port is used from the BVMS Operator Client to the camera. This port is used by the BVMS Operator Client as a destination port. The source port is dynamic and therefore, it cannot be adjusted.

Hash Tag "#" is one of the few special characters, which is accepted by the camera, but it cannot be accepted on BVMS side (in order to connect to the camera) — due to the limitations of communication specifics some BVMS components are using. And as a result, communication might not work properly and "No connection" warning message in Operator Client image pane and black screen might occur

When integrating Intelligent Insights with a self-signed certificate, the BVMS operator client always shows an error message when opening a widget in the BVMS operator client image pane. Find out from this article how to solve this behavior!

If you have a Bosch Security Systems product which needs repair or replacement, this is what you need to know about how the Central Technical Support team handles the RMA process.

When you request to reset the DIVAR password, the Central Technical Support team provides you with the unlock codes. The unlock codes received from the CTS are valid only for 1 Day. Moreover, please make sure that the date displayed on the Live monitor matches the date you requested the password reset.

If you forgot the password of your Bosch IP recorder and you want to reset its password, the Central Technical Support Team can help you.

If you have CPP4 cameras with 6.11 firmware (FW) version and you need to upgrade them to the latest version, normally you have to upgrade to an intermediate firmware version first. But where you can find this firmware ?

This article will help you to go directly to the technical articles related to a specific model of DIVAR IP, by using labels. Each Knowledge Base article contains relevant labels that relate to the DIVAR IP model for which you are searching for an article.

Find out from this article if there are restrictions of VRM Configuration utility pre-installed on DLA

If WebRTC doesn’t work for you, follow this article to locate the reason:

This script will make your encoder to toggle relay 1 only when IVA rule #1 alarm is active.

If you want to reinstall your unit with unconfigured HDDs and the RAID is not created yet, follow the steps from this article.

MegaRAID Storage Manager software automatically rebuilds the RAID 5 on a DIVAR IP unit without data loss. The rebuild is a fully automatic process, so it is not necessary to issue a Rebuild command. You can also monitor the progress of drive rebuilds. Once the chassis was replaced and the drives were mounted in drive carriers, follow this step-by-step guide in order to rebuild RAID 5 on a DIVAR IP.

By extracting the playback in the MOV or MP4 format using BVMS Operator Client, the video is split into multiple files and not in a single file/ segment. This behavior became visible after upgrading BVMS to version 11.1.1.65.