Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 
    Sort by:
    ‎08-23-2022 02:52 PM
    As video surveillance use grows in commercial, government and private use cases, the need for low-cost storage at scale is growing rapidly. BVMS, Bosch cameras, HPE hardware and SUSE Enterprise Storage provide a platform that is an ideal target for recording these streams.
    View full article
    ‎06-16-2022 02:58 PM
    Follow this article and find out what to do if the Bosch VRM Monitor page does not open correctly, but instead displays an Error and the video is always Black.
    View full article
    0% helpful (0/1)
    ‎06-08-2021 09:17 AM
    In order to quickly offer a technical solution or to provide a professional advice for the next analysis steps, the technical support specialists need to get some general and basic information. Ticket content should always be in English and provided in a well summarized and structured way in order to be able to provide a quick and appropriate feedback. Not following the guideline will impact the processing time of the ticket.   Related Products: BVMS, Operator Client This article describes the initial information needed to start troubleshooting Operator Client Crash.   General Information   SMA validity How to retrieve the Hardware ID for BVMS and check the Software Maintenance Agreement (SMA) status? BVMS stand alone or appliance Detailed problem description   Symptom specific Information Problem Description   Note down the events that lead to crash Classify the crash reproducible crashes that trigger Windows Error Reporting crashes/ hangs/ freezes that are hard to reproduce, or take long before repeating   Logging Information   Dump file from the crash – refer to the following article How To create BVMS memory dump?  ConfigCollection from the machine where the crashing Operator Client is running.
    View full article
    100% helpful (2/2)
    ‎08-11-2021 09:52 AM
    The entire BVMS installation package, available on the downloadstore, contains the client as well as the server components. When a BVMS client needs to be deployed, all of this data (over 2.5GB) needs to be copied to the target workstation, which can be quite a challenge in some environments.
    View full article
    100% helpful (1/1)
    ‎11-17-2022 09:17 AM
    This article describes the camera tamper detection options available with FW 6.30: Scene too dark / bright, global change, reference image check.
    View full article
    ‎11-09-2021 12:00 PM
    In order to quickly offer a technical solution or to provide a professional advice for the next analysis steps, the technical support specialists need to get some general and basic information. Ticket content should always be in English and provided in a well summarized and structured way in order to be able to provide a quick and appropriate feedback. Not following the guideline will impact the processing time of the ticket. Related Products: BVMS SDK, Cameo SDK, BVMS  Overview: Analyzing BVMS systems interaction with BVMS SDK based application is a challenging task. One needs to determine if the issue is based on wrong implementation of the BVMS SDK functionality, wrong programming practices, functionality and runtime behavior of BVMS system with SDK functionality or BVMS SDK issues. In order to troubleshoot BVMS SDK or Cameo SDK application support needs the following information and logging. Please prove the following information to support:   Symptom specific Information   Problem Description SMA validity How to retrieve the Hardware ID for BVMS and check the Software Maintenance Agreement (SMA) status? BVMS stand alone or appliance Detailed description of the expected behavior of the SDK functionality. Detailed description of the actual behavior of the SDK functionality.   SDK Components What type is the standalone SDK application (based on ClientSDK, ServerSDK, or CameoSDK) and on which machine is it running? Are there additionally client scripts, server scripts or workstation startup scripts?   SDK Interactions Do SDK components interact with remote Operator Clients? Do SDK components interact with the Operator Client UI? Do SDK components control devices? Do SDK components link to 3rdParty devices or applications?   Environment Which shared resources are accessed by SDK actions? (Dome cameras, AMG, Operator Client UI) Do SDK components interact with an unreliable environment? (Unstable network, offline devices, offline PCs, etc.) Do SDK components properly handle offline situations? (offline devices, configuration changes, etc.)    Logging Information   Please provide source code and/or Log files The optimal approach is to provide both source code and logging for the problematic BVMS SDK application. If it is not possible to provide the code, we will start the troubleshooting process based only on the logging. Source Code Provide a little sample application that illustrates the BVMS SDK issue and list the reproduction steps. Logfiles Add log outputs to the SDK application functionality. The logs should illustrate which BVMS SDK functionality was called at which time. Provide the logs to support.   List of Typical Mistakes that are often seen when troubleshooting BVMS / Cameo SDK based applications   Use of Thread. Sleep() in event handlers - Consequence: loss of events in customer SDK application. Implementations that are not thread safe - Consequence: unexpected SDK application effects Unintentional introduction of multithreading issues by using timers - Consequence: unexpected SDK application effects Application without "speed control" - Consequence: operator overload in case of high event frequency Lack of configuration change handling - Consequence: data inconsistencies in SDK application (access to no longer existing devices) Lack of traces/logging in SDK code - Consequence: not detected malfunctions and troubleshooting difficulties Lack of error tolerance in SDK code - Consequence: unhandled exceptions in SDK application / script Lack of exception handling - Consequence: SDK application crashes
    View full article
    100% helpful (1/1)
    Wednesday
    If you forgot the service level password for you Bosch IP camera and you want to reset its password, the Central Support Team can help you.
    View full article
    ‎11-19-2021 10:00 AM
    This is the old way as for Project Assistant versions < 1.3.
    View full article
    ‎08-14-2023 11:08 AM
    This article describes how to benchmark Video Analytics and differentiate video analytics solutions.
    View full article
    100% helpful (1/1)
    ‎08-02-2022 04:35 PM
    SecureOS sends events from analytics to BVMS, which can be translated into alarms and/or stored into the logbook.
    View full article
    ‎12-05-2023 08:25 AM
    Different devices, whether cameras or encoders, offer a different amount of processing power for video content analysis (VCA).
    View full article
    ‎12-22-2023 09:51 AM
    This article explains if you can receive / retrieve more than 4 live video streams with BOSCH Video Security Client on Windows PC
    View full article
    ‎11-17-2022 09:22 AM
    This article describes idle and removed object detection with Intelligent or Essential Video Analytics in FW 6.30, how to configure it and what the limitations are.
    View full article
    100% helpful (1/1)
    ‎05-10-2023 12:17 PM
    🛈 Port Forwarding Allows remote computers (for example, computers on the Internet) to connect to a specific computer or service within a private local-area network (LAN). In a typical residential network, nodes obtain Internet access through a DSL or cable modem connected to a router or network address translator (NAT/NAPT). Hosts on the private network are connected to an Ethernet switch or communicate via a wireless LAN. The NAT device's external interface is configured with a public IP address. The computers behind the router, on the other hand, are invisible to hosts on the Internet as they each communicate only with a private IP address. When configuring port forwarding, the network administrator sets aside one port number on the gateway for the exclusive use of communicating with a service in the private network, located on a specific host. External hosts must know this port number and the address of the gateway to communicate with the network-internal service. Often, the port numbers of well-known Internet services, such as port number 80 for web services (HTTP), are used in port forwarding, so that common Internet services may be implemented on hosts within private networks.
    View full article
    100% helpful (1/1)
    ‎11-25-2021 03:40 PM
    This article describes how the integrity of BVMS software can be checked.
    View full article
    ‎03-29-2022 12:41 PM
    Use the Project Assistant to its full extent and once the cameras are connected to the target network, perform a network scan using the BVMS Configuration Client
    View full article
    ‎08-29-2023 10:18 AM
    This article contains the LIF fie which will help you to activate the Activation Key from SLMS for BVMS Lite v10.0
    View full article
    ‎07-12-2021 09:39 PM
    In order to quickly offer a technical solution or to provide a professional advice for the next analysis steps, the technical support specialists need to get some general and basic information. Ticket content should always be in English and provided in a well summarized and structured way in order to be able to provide a quick and appropriate feedback. Not following the guideline will impact the processing time of the ticket.   Related Products: BVMS SDK, BVMS    Overview: Analyzing BVMS systems with SDK components is a challenging task, because the functionality and the runtime behavior of those systems are harder to determine than for a BVMS systems without SDK functionality. In order to troubleshoot BVMS systems with SDK components support needs the following information and logging. Please prove the following information to support:   Symptom specific Information   Problem Description SMA validity How to retrieve the Hardware ID for BVMS and check the Software Maintenance Agreement (SMA) status? BVMS stand alone or appliance Detailed description of the expected behavior of the SDK functionality. Detailed description of the actual behavior of the SDK functionality.   SDK Components What type is the standalone SDK application (based on ClientSDK, ServerSDK, or CameoSDK) and on which machine is it running? Are there additionally client scripts, server scripts or workstation startup scripts?   SDK Interactions Do SDK components interact with remote Operator Clients? Do SDK components interact with the Operator Client UI? Do SDK components control devices? How often are client scripts triggered? How often are scripts triggered by BVMS event?   Environment Which shared resources are accessed by SDK actions? (Dome cameras, AMG, Operator Client UI) Do SDK components interact with an unreliable environment? (Unstable network, offline devices, offline PCs, etc.) Do SDK components properly handle offline situations? (offline devices, configuration changes, etc.)    Logging Information Please provide the Scriplet and/or Log files The optimal approach is to provide both the scriplet and logging. ClientScript logfiles: can be found in the ConfigCollection of Operator Client machines. ServerScript logfiles: can be found in the ConfigColletion of Management Server machines.   Make sure that logging is implemented in the script and that logging is activated in the configuration.  
    View full article
    ‎03-24-2022 11:14 AM
    This article explains how to configure Monitor B output for Divar AN 3000-5000.
    View full article
    ‎06-01-2022 04:51 PM
    This article explains how you can restore Bosch IP cameras to the factory defaults and what changes are done after this action depending on the camera Firmware
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist