Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    Wednesday
    The Project Assistant offers two ways of importing existing project data Importing a .bpassist file or importing from a tab-separated text file
    View full article
    Tuesday
    The purpose of this article is to help you disabling the compass character from the Screen Display (OSD) of the Bosch PTZ camera via its web interface
    View full article
    a week ago
    Find out from this article where you can find the installation code needed to license a Bosch camera
    View full article
    2 weeks ago
    This article is meant to provide you with the step-by-step guide to activating the wiper and the white lights illuminator option, if your camera is equipped with both of them.
    View full article
    100% helpful (1/1)
    2 weeks ago
    The browser supported by Bosch cameras depends on the CPP that camera belongs to and on the Firmware version the camera has.. In web browsers that do not support MPEG-ActiveX, VCA configuration is only possible via Configuration Manager.
    View full article
    2 weeks ago
    Depending on the FW version of cameras and BVMS version you have installed, different possible situations can occur such as: the cameras are not working because the firmware is old, Configuration Client will display a message like: "unknown platform", Gaps in recordings or not recording at all and so on
    View full article
    100% helpful (1/1)
    ‎10-28-2022 01:22 PM
    Whenever a central NTP Server is available the recommendation is to synchronize all cameras against the NTP central server.
    View full article
    ‎10-21-2022 03:00 PM
    Find out from this article what might be the cause that could lead to this message being displayed: “error 18: wrong or no signature”
    View full article
    ‎08-04-2022 08:15 AM
    The default SMTP port number for Bosch IP cameras is 25. The required SMTP port can differ depending on the service provider. From FW 5.80.0073 onwards it is possible to change the SMTP port using Alarm Task Script Language (ATSL).
    View full article
    ‎07-28-2022 11:53 AM
    Follow the instructions from this article and find out how you can activate a license on your Bosch camera.
    View full article
    100% helpful (1/1)
    ‎07-28-2022 11:14 AM
    Question:  What you should know when you request a password reset for the Bosch IP camera? If you forgot the service level password for you Bosch IP camera and you want to reset its password, the Central Support Team can help you. Before requesting a password reset for your IP camera, please note that you need to provide some important information to the Central Support Team to get help from them.
    View full article
    100% helpful (1/1)
    ‎01-24-2022 02:25 PM
    The IP camera address is always the key if you would like to monitor or remote viewing it. Like any network device, the camera is assigned an IP address when it is connected to the router with Internet access and powered on. Here we will introduce 3 ways to find the network camera IP address quickly and easily.
    View full article
    ‎08-23-2021 12:09 PM
    The unit can receive the time signal from a time server using various time server protocols and then use it to set the internal clock. The device polls the time signal automatically once every minute. To check the NTP connection from the camera please follow the below steps:
    View full article
    100% helpful (4/4)
    ‎08-23-2021 09:07 AM
    This article informs about improvements in firmware handling and new security mechanisms that help our customers to increase security related to firmware updates and IP camera protection.
    View full article
    ‎08-05-2021 01:39 PM
    S imple Network Management Protocol (SNMP) is a common protocol to monitor the health status of a system. Such a monitoring system typically has a central management server that collect all the data from the system’s compatible components and devices. A network management server can poll the health status of a device via SNMP requests. This article shows how to configure Bosch cameras in order to be able to answer to such requests. For more information on SNMP and supported SNMP versions please check -   What should you know about SNMP and Bosch cameras SNMP support? Note: Please keep in mind that for SNMP v3 only the the Standard MIB II file is supported. This means that only general network device performance monitoring parameters can be requested. There is no Bosch Private MIB II extension for SNMP v3. For exact support details check -  What should you know about SNMP and Bosch cameras SNMP support?
    View full article
    ‎08-05-2021 01:30 PM
    Simple Network Management Protocol (SNMP) is a common protocol to monitor the health status of a system. Such a monitoring system typically has a central management server that collect all the data from the system’s compatible components and devices. A network management server can poll the health status of a device via SNMP requests. This article shows how to configure Bosch cameras in order to be able to answer to such requests. For more information on SNMP and supported SNMP versions please check -   What should you know about SNMP and Bosch cameras SNMP support?
    View full article
    ‎08-05-2021 01:20 PM
    The default Community Strings for Bosch cameras is - public. To change it, please follow the steps below.
    View full article
    ‎07-27-2021 04:56 PM
    This article explains how to integrate the Bosch MIC IP 7000 HD camera series into any existing analog CCTV system using the Bosch VIDEOJET decoder 3000. The most common integration scenarios are listed below: Simple integration using direct connectivity to analog monitor and joystick, typically found in single camera installation (for example, mobile surveillance vehicles) Integration into an existing analog matrix switcher typically found in large installations (such as for city surveillance)
    View full article
    ‎07-27-2021 03:47 PM
    Answer This guide is meant to explain how you can find the connection state events of a camera in Operator Client - Bosch Video Management System.
    View full article
    ‎07-19-2021 11:20 AM
    Sometimes it is preferable to have a different “user mode” during the day then in the night. Our cameras by default have the option to switch the user mode e.g. triggered by the camera D/N switch over. But also other triggers can be chosen. Below an example how to setup the “user mode” switching triggered by the D/N switch over.
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist