Security: Video

This article contains the username and password of SuperDoctor 5 for Divar IP 7000 AIO

This article provides an answer to the question: Can I restrict the live view or playback in VSC for certain cameras added in DIVAR hybrid 5000? Yes, you can restrict the live view or playback for certain cameras added in DIVAR hybrid 5000 for an user who is using Video Security App.

This article explains step by step how to do the configuration of a camera & VJD 7000 & Monitor Group integrated in BVMS 11.1.1.

Essential Video Analytics (VCA) does not work as soon as the image is rotated to 90 degrees (under Initialization) and the camera is restarted. Additionally, the movements or objects are not recognized. As soon as you set "Rotate image" to 0 degrees and set it back to 90 degrees, motion detection via Essential Video Analytics suddenly works again.

This article explains the difference between Wide Dynamic Range, High Dynamic Range and Bosch HDR X.

This article shows step by step how to call a FLEXIDOME IP panoramic 5000 camera preposition in Operator Client. 

This article provides an answer if can the Operating System of a DIVAR IP Series be upgraded.

This article provides an answer to the question: Can I install Intelligent Insights into DIVAR IP all-in-one 5000?

This article explains how to connect an INTEOX camera to the S&ST ecosystem using Configuration Manager (7.20 and later).

There is an issue with VRM versions lower than 4.0 where the retention time for recordings from VSG instances is set incorrectly. There are a few things that usually cause the recording mode to be set incorrectly. Find out more details from this article!

When accessing the Operator Client from the Kiosk mode, the camera streams displayed on the cameos show a view that does not match the view from Operator Client running from desktop (Under the BVRAdmin account) or Remote Desktop.

This article presents what should we check first if Channel 5 & 6 of DSA E2800 are showing as disconnected: Verify if the expansion slots are connected correctly (page 21) Afterwards, wait a few minutes until they load up, and only then start the DSA S2800. Now, you can check in the Configuration Manager to see if the IP addresses need to be changed. Once you verify that they are correct, you can add the Device in Configuration Client.

This article presents where you can find and download the Firmware for NetApp DSA unit. Depending on the version you need, you can access this E-Series SANtricity OS Controller Software Link for Downloads. 

If you are trying to connect your device to the Remote Portal and it says that server is unreachable, please check the firewall blocks and whether certain ports are not blocked.

This article describes how you can add and grant a Technician user permission on a specific group or camera in Bosch Remote Portal. Per default a Technician user can access all unrestricted groups and cameras. The Technician can further access all restricted groups and cameras to which he is added to.

Does the video stream (from camera to client) remain only on the LAN? Or, does the video stream need to first process 'through' the cloud?

Camera Counter Reports are available on Bosch IP cameras capable of Essential Video Analytics or Intelligent Video Analytics, which are connected directly to the Remote Portal.

This article presents what symptoms appear in BVMS Operator Client if Time synchronization is wrongly set. Also provides some recommendations about what to do to avoid this symptoms. 

This articles explains what does the User Name column indicate in the BVMS Operator Client LogBook.

Is there a way to request for the panoramic camera de-warped snapshot via URL?