Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 
    Sort by:
    ‎05-25-2021 10:11 AM
    In Cloud-based Services, different 'Actions' can be configured for automatic processing as well as manual action for the operators (Alarm Agents). There are 2 different options how an action is processed: An 'Automatic Action' is processed automatically when the related Service Scenario is performed. An 'Intervention Action' is executed manually by an operator from the Cloud-based Service Operator Interface. This note shows available actions in Cloud-based Services and provides a step by step instruction to configure these actions.   Step-by-step guide   1. Send e-mail "Send e-mail" sends an e-mail notification to the configured recipient(s). The action can be used as manual action for the operators (Intervention Action). The content of the alarm email can be configured to the customer's needs.   To configure a "Send e-mail" action, perform the following steps: 1. Open Cloud-based Services Configuration website (/config), log in as Integrator or Config Agent. 2. Enter the related Account. 3. Click tab 'Actions'. 4. Click '+' button to add an action. 5. Give the action a descriptive name and select 'Email'. 6. Type recipients, CC's, mail subject and message. Use the pull down to enter environment variables to the e-mail text. 7. Click 'Create'. 8. Add the action to a Service Scenario for processing.   2. Execute PTZ Command "Execute PTZ Command" starts an auxiliary command on a Pan-Tilt-Zoom (PTZ) camera. The action can be used for automatic processing (Automatic Action) as well as manual action for the operators (Intervention Action). Note the available auxiliary commands in the camera’s manual. To configure an "Execute PTZ Command" action, perform the following steps: 1. Open Cloud-based Services Configuration website (/config), log in as Integrator or Config Agent. 2. Enter the related Account. 3. Click tab 'Actions'. 4. Click '+' button to add an action. 5. Give the action a descriptive name and select 'Execute PTZ Command'. 6. Select PTZ camera, select auxiliary command and type the command No. 7. Click 'Create'. 8. Add the action to a Service Scenario for processing   3. Go to PTZ Preposition "Go to PTZ Preposition" moves a Pan-Tilt-Zoom (PTZ) camera to a preposition. The action can be used for automatic processing (Automatic Action) as well as manual action for the operators (Intervention Action). The prepositions (shots) need to be configured via the Device Page upfront. To configure a "Go to PTZ Preposition" action, perform the following steps: 1. Open Cloud-based Services Configuration website (/config), log in as Integrator or Config Agent. 2. Enter the related Account. 3. Click tab 'Actions'. 4. Click '+' button to add an action. 5. Give the action a descriptive name and select 'Go to PTZ preposition'. 6. Select PTZ camera and type the preposition No. 7. Click 'Create'. 8. Add the action to a Service Scenario for processing.   4. Play Audio on Device "Play Audio on Device" replays an audio file directly from the device's loudspeaker. The action is intended to perform standard audio interventions without the need for the operator (alarm agent) to talk. "Play Audio on Device" can be used for automatic processing (Automatic Action) as well as manual action for the operators (Intervention Action). Audio files need to be prepared and installed by CBS development. If you want to use your own audio files, please get in contact with technical support. To configure a "Play Audio on Device" action, perform the following steps: 1. Open Cloud-based Services Configuration website (/config), log in as Integrator or Config Agent. 2. Enter the related Account. 3. Click tab 'Actions'. 4. Click '+' button to add an Action. 5. Give the Action a descriptive name and select 'Play audio on device'. 6. Select the audio device and select the audio file. 7. Click 'Create'. 8. Add the action to a Service Scenario for processing.   5. Switch Relay "Switch Relay" switches a relay of one or more IP devices. The action can be used for automatic processing (Automatic Action) as well as manual action for the operators (Intervention Action). To configure a "Switch Relay" action, perform the following steps: 1. Open Cloud-based Services Configuration website (/config), log in as Integrator or Config Agent. 2. Enter the related Account 3. Click tab 'Actions'. 4. Click '+' button to add an action. 5. Give the action a descriptive name and select 'Relay'. 6. Select activation mode and select one or more relays to switch. 7. Click 'Create'. 8. Add the action to a Service Scenario for processing.   6. Notify Monitoring Center and Log Event Both action types "Notify Monitoring Center" and "Log Event" are obsolete and can not be used in a Service Scenario.  See also: How to add a user to Remote Alert service in Remote Portal?
    View full article
    ‎05-20-2021 10:47 AM
    Question   Where can you find the ISO image for recovery of DIVAR IP 7000R2 and DIVAR IP 6000R2?   Answer   Related Products: DIVAR IP 7000R2 and DIVAR IP 6000R2   CTN Description   DIP-6180-00N  DIVAR IP 6000 2U W/O HDD  DIP-6183-4HD  DIVAR IP 6000 2U 4X3TB  DIP-6183-8HD  DIVAR IP 6000 2U 8X3TB  DIP-6184-4HD  DIVAR IP 6000 2U 4X4TB  DIP-6184-8HD  DIVAR IP 6000 2U 8X4TB  DIP-61F0-00N  DIVAR IP 6000 3U W/O HDD  DIP-61F3-16HD  DIVAR IP 6000 3U 16X3TB  DIP-61F4-16HD  DIVAR IP 6000 3U 16X4TB  DIP-7180-00N  DIVAR IP 7000 2U W/O HDD (R2)  DIP-7183-4HD  DIVAR IP 7000 2U 4X3TB (R2)  DIP-7183-8HD  DIVAR IP 7000 2U 8X3TB (R2)  DIP-7184-4HD  DIVAR IP 7000 2U 8X3TB (R2)  DIP-7184-8HD  DIVAR IP 7000 2U 8X4TB (R2)  DIP-71F0-00N  DIVAR IP 7000 3U W/O HDD (R2)  DIP-71F3-16HD  DIVAR IP 7000 3U 16X3TB (R2)  DIP-6704-HD 4000GB HDD DIVAR IP 6000/7000    For recovery of DIVAR IP 6000 R2 or DIVAR IP 7000 R2 one should use only the DVD provided with the particular device. Do not use the DVD for recovery if you are not sure that it is the one delivered with the system. In case the DVD is lost or damaged request the respective ISO image from Bosch Technical Support.  Solution:  Request the ISO image from Bosch Technical Support:   Provide the Serial Number of the device Issue description: What is the reason for the recovery Why it is not possible to use the recovery DVD   Note: This article will guide you through the recovery steps of a DIP:  TSG: Rebuild broken OS RAiD on DIVAR IP 6000, DIVAR IP 6000 R2, DIVAR IP 7000, DIVAR IP 7000 R2
    View full article
    100% helpful (1/1)
    ‎05-13-2021 03:45 PM
    Related Products Workstations, Z4G4, Microsoft License Question Is it possible to Activate Windows 10 by phone for Bosch Workstations? Answer With introduction of Windows 10, Microsoft disable the phone license activation for Bosch Workstations. Please perform online activation over internet.
    View full article
    ‎05-13-2021 03:39 PM
    Related Products: BVMS / MVS / VSDK Overview: On request from development to provide a dump file from MVS system please follow the steps in the solution section.   Step-by-step guide   Reproduce the issue Download the Microsoft debugger procdump (https://technet.microsoft.com/en-us/sysinternals/dd996900.aspx). The procdump tool is also attaced to the article :How To create BVMS memory dump?  When application is crashing, do not click any buttons on the appeared error window that will change the program state. Run the procdump.exe from the directory where you copied the tool with following command line (Start - cmd): procdump.exe –ma <name of the programm exe> <dump file name>.dmp   In the case of MVS you need to do that for all 4 MVS services: - Bosch.MVS.SourceProvider.BVMS.Service.exe - Bosch.MVS.DataStorage.Service.exe - Bosch.MVS.SourceProvider.MobileCamera.Service.exe - Bosch.MVS.Transcoder.Service.exe
    View full article
    ‎05-12-2021 10:34 AM
    The Windows Storage Server operating system of DIVAR IP all-in-one 7000 is installed on a two SSD drives in redundant (mirrored) configuration. Health status of the mirrored OS drives can be monitored using a tool called Virtual RAID on CPU (formerly known as Rapid Storage Technology). Installation and configuration steps are described below. Step-by-step guide   1. Installation: Download the setup from here Copy the content to a USB drive When the BVMS default screen is shown, press CTRL + ALT + DEL Hold down the SHIFT key while clicking Log off Log in as BVRAdmin Transfer the IATA_CD.exe from the USB drive to the BVRAdmin desktop Double click the IATA_CD.exe executable Follow the installation procedure as shown in the screen shots     2. Email notification: Note: The E-mail notification feature is based on SMTP access without authentication. It is strongly suggested to use this functionality only with a dedicated server in the local network, which is specifically configured for this purpose and doesn’t handle any critical data.
    View full article
    ‎04-05-2021 05:18 PM
    If you want to control the camera from a DIVAR wired through a VJD 3000, you have to configure the VJD and the DIVAR as well. Below you will find the steps which will help you to set up your devices.
    View full article
    100% helpful (1/1)
    ‎04-05-2021 05:17 PM
    Question Why I cannot see my camera in the Logical Tree from Operator Client? Answer Please make sure that you have done all the steps below accordingly. Normally, to be able to view a camera in the Operator Client, you need to: Go to the Maps and Structure tab from Configuration Client. Drag and drop the camera in question from the Device Tree to the Logical Tree. Save and Activate the changes. This step is very important because otherwise, you will not be able to see the changes in Operator Client, even though the first 2 steps were carried out in Configuration Client.
    View full article
    100% helpful (1/1)
    ‎04-05-2021 04:49 PM
    This article explains how to find and calculate the specific size of BVMS logs on your server when the log starts to overwrite your own data.
    View full article
    100% helpful (1/1)
    ‎04-05-2021 04:44 PM
    Various overlays in the video image provide important status information. But what does mean the blinking play button near the yellow exclamation icon?
    View full article
    ‎04-05-2021 04:37 PM
    This article provides an overview of Operator Client (BVMS 10.0.1) for most used functionality for security operators and incidental users.
    View full article
    100% helpful (3/3)
    ‎04-05-2021 04:24 PM
    This article provides you the way you can set the VIDEOJET decoder 8000/ 7000 (VJD-8000/ VJD-7513) to factory default. Article requirements: VIDEOJET decoder 8000/ 7000 Keyboard monitor
    View full article
    100% helpful (1/1)
    ‎04-05-2021 04:14 PM
    This article helps you to solve the situation where the "No Config" error message appears when you try to authenticate in Operator Client. This error can be persistent, no matter what central server you attempt to login to and no matter what user account or credentials you are trying to use. This means that you have a corrupt cache .dat file on your system. Follow the steps from this article if you attempt to login into BVMS Operator Client and encounter the message below and you want to fix it: "Please enter your credentials... No config..."
    View full article
    100% helpful (1/1)
    ‎04-05-2021 12:13 PM
    When working with previous versions of BVMS, remote connectivity was cumbersome due to the amount of port mapping that needed to be configured. BVMS 7.5 provides a new method of remote connectivity utilizing Secure Shell (SSH) Tunnelling. SSH Tunnelling constructs an encrypted tunnel established by an SSH protocol/socket connection. This encrypted tunnel can provide transport to both encrypted and un-encrypted traffic. The Bosch SSH implementation also utilizes Omni-Path protocol, which is a high performance low latency communications protocol developed by Intel. Key management The BVMS SSH service generates a private and public key when it is started for the first time. Both keys are saved in an encrypted file. When the BVMS SSH service restarts this file is detected and the private key is read.   Step-by-step guide   1.Configuration   A. Installation There is little to no configuration required for this feature to function. The SSH Service must be installed and running. If deploying a BVMS Pro system, insure the SSH Service is part of the installation process. Recording Appliances that ship with BVMS 7.5 should have the service pre-installed. Check your “Services”. If the service has not been installed, the install package can be run from the BVMS 7.5 downloadable install package. If working with a DIVAR IP Recording Appliance, the appliance “Installer Package” must be used.   B. Port mapping entry The primary configuration step is to configure one (1) port forwarding for the BVMS Central Server to utilize port 5322 for both internal and external connections. This is the only port mapping entry that needs to be made for the entire system. The image below shows a sample configuration.   2. Operation   A. Login with the Operator Client After the basic configuration is done, logging in via Operator Client is very intuitive: From the log menu, select the “Connection” drop down menu, then Select <New…> You will be prompted to enter an IP address or DNS host name. You will also notice a cheat guide below the entry menu that will assist with address entry. Addressing must be in the following format: ssh://IP or servername:5322. In the example we used: ssh://49.49.49.49:5322. After entering a properly formatted address, enter a valid user name and password. SSH users MUST have a password associated with their BVMS account. User accounts without a password cannot log in utilizing an SSH Connection.   B. Verification After connection is established via an SSH Tunnel, all communications between the BVMS Server (192.168.1.19) and a remote client (49.49.49.48) are encrypted. Below is a Wireshark Capture taken from the BVMS Server after a connection is established. C. Changing the SSH port Locate the SSH service configuration file in "C:\Program Files\Bosch\BVMS\bin" Open the configuration file and find the section below. Edit the value of the BvmsSshServicePort (the port should be unused) and restart the system.
    View full article
    ‎04-05-2021 12:06 PM
    This article explains how to set an Unconfigured Bad Drive to Unconfigured Good on a DIVAR IP 6000/ 7000. This step is required if the new drive is not listed under Unconfigured Drives. A possible reason for the Unconfigured Bad status is when a device that has not been removed properly is reconnected to the controller.
    View full article
    100% helpful (1/1)
    ‎04-05-2021 11:39 AM
    Do you want to configure the 3rd party iSCSI storage with different LUNs for recording more cameras without Bosch VRM? This article explains you if this application is supported.
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist