Security: Video

Can I display more than 1 camera on a single Monitor of Decoder VJD-7513 in BVMS 11.0 when an alarm is triggered?   System Overview: BVMS 11 1 monitor connected to 1 x VJD-7513 that is part of a Monitor Group The monitor has a layout consisting of several image panes Desired status: when an alarm is triggered → pop up the image of the 4 cameras on the same decoder monitor

This article contains a step-by-step guide which explains how you can do the setup for the camera's live view image pane to be displayed in full screen in the Operator Client if a motion alarm is triggered on that camera,

Windows 11 Pro is now officially supported as OS for BVMS 11.1.1 Operator Client

The purpose of this article is to help you disabling the compass character from the Screen Display (OSD) of the Bosch PTZ camera via its web interface

This article explains step by step how to set Bosch Cameras & Divar network 2000 & UML-245-90 monitor to be able to retrieve audio.

Check this article and find out what you can do if you are using one Divar network 2000 and you have a new Flexidome IP 5000i IR camera, but you cannot add it to the Divar because it is not displayed in “Detection” > “Device search” screen.

At first sight, you might think that the model is the correct one that shows in the Datasheet, but the Video card is smaller than the DIP Slot.

 This article shows the keyboard shortcuts that can be used by operators when operating the BVMS system. 

Starting with BVMS 10.0, ONVIF encoder events can be retrieved from VSG or ONVIF encoder directly. Additionally to ONVIF profile S, BVMS 10.0 supports ONVIF profile T.

Remote Portal's Remote Connect service allows connection to your devices through the Remote Portal with your client software, such as Video Security Client and Video Security App.

Before you can operate your VIDEOJET decoder 7000/ 8000 within your network, it must have a valid IP address for your network and a compatible subnet mask. This articles explains how you can change the IP Address of VIDEOJET decoder 7000/ 8000 using Configuration Manager.

The normal process is to enable Complete memory dump, this will capture in the event there is an Unhandled Exception.

This article explains how you can change the relay mode back to automatic via a script executed when the relay open event is triggered.

The browser supported by Bosch cameras depends on the CPP that camera belongs to and on the Firmware version the camera has.. In web browsers that do not support MPEG-ActiveX, VCA configuration is only possible via Configuration Manager.

The calculation of the storage capacity is done in different way in Configuration Client and VRM Monitor. Check this article and find useful details!

The BVMS 11.1.1 Configuration Manual contains the lists for all components of BVMS, the ports that must be open within a LAN. You can find the used ports list starting with page 346 from the BVMS Configuration Manual.

When login Remote Portal in Configuration Manager v7.20.0067, the following error message is displayed "The remote name could not be resolved: api.remote.boschsecurity.com"

Find out from this article how does the ‘Active profile’ work for Flexidome Multi 7000i camera

Have a look in this article to learn how you can add ONVIF cameras to Configuration Manager through VSG managed by VRM.

The minimum retention time is going to influence the amount of storage needed. The higher the minimum retention time, the more storage space is required. In this article we are going to show you how to add DIVAR IP 5000 EZ in My devices (Configuration Manager) and configure max & min retention time.