Security: Video

Never lose track of an object of interest! Intelligent Tracking automatically zooms in to and follows a selected Intelligent Video Analytics object as far as possible with the camera.

This article describes how to configure the Map-based calibration and Geolocation in different calibration methods

When camera is set to auto track (by web interface) to "auto"-> IVA is detecting an object but camera is not following. Auto tracking works and metadata is displayed only on a stored preposition.

This article describes the absolute minimum information we need in order to start analyzing and optimizing Video Analytics performance

Can I mask areas that should not trigger an alarm (e.g. false detection due to sun reflection)?

Applicable when using the following software application. Bosch Video Management System (BVMS) version 10.0.1 and above. Bosch Configuration Manager version 7.0 and above. Live page on the web browser for IP camera operating on firmware version 7.70.0126 and above.

This article contains detailed technical description of Intrusion Detection, set up guidance for different usage scenarios and best practices. It is useful to get in depth knowledge about Intrusion detection or to find the answer of frequently asked questions.  

The museum mode of Intelligent and Essential Video Analytics is an optimized tracking mode to detect whenever someone tries to reach towards and touch a valuable asset like a museum exhibit. It can also be used in any other application where approaching a sterile zone from a more crowded environment shall be detected.

This articles gives a short introduction to scripting alarm and counter tasks with Intelligent and Essential Video Analytics in FW 7.60. It also provides a broad selection of example scripts for explanation as well as including real world application examples.

This article describes idle and removed object detection with Intelligent or Essential Video Analytics in FW 6.30, how to configure it and what the limitations are.

This article describes the camera tamper detection options available with FW 6.30: Scene too dark / bright, global change, reference image check.

In this article, you will find such an automation process between Bosch Cameras and Advantech Adam I/O devices.

The article describes how to track ships using Intelligent Video Analytics with FW 6.30, how to configure this and what the limitations are.

This technical note summarized the different integration possibilities available today and the clients supplied by Bosch.

This article provides an overview of object classification, describes how to configure it and what the limitations are.

Find out from here what is VCA (Video content analysis) and how you can stop this setting.

Related Products: Configuration Manager 7.00 and above. This article shows how to use recorded video in Configuration Manager in order to calibrate a camera and to configure a task.