Security: Video

The IP camera address is always the key if you would like to monitor or remote viewing it. Like any network device, the camera is assigned an IP address when it is connected to the router with Internet access and powered on. Here we will introduce 3 ways to find the network camera IP address quickly and easily.

The DIVAR IP units are prepared from production to use at first setup the port 8454.

To be able to deploy a camera with DHCP disabled to Bosch Remote Portal, please perform the steps from this article.

This article contains the options for physical/ default reset of Bosch Inteox cameras.

This article explains the 3 options for deleting a user from Bosch Remote Portal.

The Administrator can create groups and even nested groups to organize devices in Remote Portal

This article describes how the GDPR impacts video surveillance systems and how BVMS can be configured to function in a GDPR compliant organization.

Bosch has implemented the ONVIF Profile M with MQTT support in its cameras (CPP6, CPP7 and CPP7.3) in the firmware 7.81.0060 and above.

This article describes how the integrity of BVMS software can be checked.

Want to know how flexible BVMS can assign streaming profiles to cameras?

This article illustrates how to avoid timeouts in the "jump to next"/"jump to previous" functionality for recordings in Bosch VMS Operator Client..

This only happens when you perform the export in BVMS Operator Client.

This is the old way as for Project Assistant versions < 1.3.

This article provides an overview of object classification, describes how to configure it and what the limitations are.

This article explains how you can change the IP Matrix Passcode PIN when using Configuration Manager version lower than 7.50 & VIDEOJET decoder 7000 (VJD-7513) FW version lower than 10.22.

Use the keyboard connection on the back of the unit to connect a Bosch Intuikey keyboard using one of the following methods.

This camera does not have the auto-focus functionality in the same sense as Autodome / Mic cameras.

Find out from here what is VCA (Video content analysis) and how you can stop this setting.

The 95 W midspan is a high-power PoH (Power Over HDBase T) device that provides data and power between an Ethernet switch and an IP camera.

Use the CTFID tool (Configuration Tool for Imaging Devices) for configuring the camera. Find in this article the download link and the release note.