This article explains what you can do when the message:“The number of windows in this view exceeds the maximum limit set in the system parameters” appears in Operator Client with minimum 2 Monitors.
If you use the firmware files that are dedicated to a certain CPP platform, then you will need to select simultaneously only the cameras with the same CPP platform.
The solution is via a workaround using an ATSL script in the encoder to re-set the COM port baud-rate upon a reboot/restart of the encoder (which should in normal practice not happen to often).
This article shows how you can use the Project Assistant to remotely commission the FLEXIDOME IP starlight 8000i camera, including set up and adjustments of field of view.
Welcome to the 2.3.0 release of Project Assistant for Windows, Android and iOS. There are many new features and bug fixes in this release that are detailed in this article.
This article describes the considerations that need to be taken into account when designing a video surveillance system that is suitable for person identification.
Check the sample script from this article. It is not a working script, that can be used directly. Follow the instructions in comments of the script to tailor it for your use.
If the Host Type was set to other value than “Factory Default” for DSA E2800 and you want to integrate it with BVMS, the targets will most likely not be scannable and there will be no recordings at all.
This article contains a step-by-step guide which explains how you can perform a full factory default of DSA E2800 via SANtricity Storage Manager by using Script Editor
