Security: Video

This article explains step by step how to remotely connect to DIVAR Network or Hybrid via Divar Mobile Viewer App

Both RJ45 and M12 plug connectors are available with IEC 11801:2002 Cat5 compliance. This further simplifies the concurrent use of both connector types within a single system.

This article presents the considerations that should be taken into account when using the conduit adapter NDA-3080-CND for installation: For protection against water ingress we recommend to avoid top entry for the conduit adapter and use the side and bottom entry position Mark the position of the hole of the surface Drill the hole with the appropriate diameter drill Install a plug in the hole Put the cable through the hole of the conduit plate Attach the conduit plate with the conduit plate adapter to the surface Install the conduit cover on the conduit plate. Tighten the two screws with the TR15 Allen key

Flexidome 8000i or other future cameras with WLAN option enabled (default ON) in an IPv6 network environment: no IPv4 possible. What to do?

This article contains the CGI commands that help you to enable or disable the MIC 7100i/MIC 7000i/MIC fusion 9000i camera's Wiper during boot-up

PTZ camera (Autodome IP starlight) doesn't move in Pan or Tilt direction. This is a basic troubleshooting guide that will help you to fix this issue.

Intelligent Audio Analytics feature is available for FLEXIDOME 5100i panoramic cameras. This feature is available on camera firmware starting with version 8.80.

If the CPP6, 7 and 7.3 cameras no longer have a live image or there is a delay in the image, and the Internet connection has been tested and is within normal parameters, it would be good to check if the cameras have the latest current firmware version 7.86.0020. This firmware version solves a 100% CPU load issue for CPP6, 7, 7.3 from firmware 7.82 to 7.86.19

Depending on the case, you can use the RS pins in various scenarios. If you wish to send information from the camera to an external device, you must use the Tx pins.

Find out how to install FLEXIDOME corner 7100i IR camera! The camera is corner-mounted, robust, and ligature-resistant, with a wide field of view that eliminates blind spots and produces high-quality images even in low light.

This article gives you more information about FLEXIDOME IP starlight 8000i camera streaming capabilities.

The sectors 1-4 are displaying only black screens and the message 'Display blanked' in Live view mode on the web page of the camera. Find out from this article how you can fix this!

The MIC IP fusion 9000i supports only simplified Chinese language. There is no option to select traditional Chinese in the menu.

This article describes how to set LUNs on a target to Read Only via Configuration Manager.

This article explain what to do if "The connection is not secure. Secure connection failed" message occurs in Configuration Manager.

Certificates play a crucial role in enhancing the security, authenticity, and integrity of the operations performed by Bosch Configuration Manager, making them a necessary component in modern networked environments.

There is a help banner in the app explaining about this function and how you can use it. For the camera part, users would need to check the respective HW and FW manuals. Depending on the camera model, the speakers may be included in the housing or could be connected through wires.

If you forgot the password of your BVMS — Bosch Video Management System and you want to reset its password, the Central Technical Support Team can help you.

This attached document describes how Bosch Building Technologies handles the life-cycle of the BVMS, BIS, AMS, and APE, and in which state a specific release can reside.

The BVMS Project Checklist is an Excel-based tool which makes it easier to design a BVMS system. This article describes how to use the project checklist. Pick the attachment you need, depending on the version of BVMS you have