Security: Video

Note that the recordings are not removed instantly. The recordings will be deleted on the next day at 12:00 AM, after the automatic delete is changed.

When Central Support Team provide assistance on a specific topic, at some point, customers may be asked to enable the VSG debug logging option. This article answers the question: Where can you find the "VSG debug logging" option in Configuration Client to enable/ disable it?

This article presents where are the Transcoder Log settings and how to enable them for log collection.  

This articles explains what  is Essential Video Analytics and also recommends when to use it. Essential Video Analytics allows you to record all of the object information and change the rules even after the fact for fully configurable forensic search.  

This article explains what is Intelligent Video Analytics IVA and recommends  when to use it. Bosch Intelligent Video Analytics is a video analytics type delivered as standard with Bosch IP 7000 to 9000 series with CPP7.3 and older. Furthermore, it does include a hardware accelerator to provide some extra power. 

This web page is for information only, so none of the fields displayed can be edited. Although this information is also included in the Log files, this view provides some valuable information at a quick glance.

Find out from this article what to do if the System Overview of Bosch camera shows the I/O controller FW version as zeros

Find out from this article what to do if the System Overview of Bosch camera shows the IR controller FW version as zeros

Find out from this article what to do if the System Overview of Bosch camera shows the Motor controller FW version as zeros

Find out from this article what to do if the System Overview of Bosch camera shows the SC or Camera controller FW version as zeros

Any modification of the DIP unit IP, adding of a Network Dongle, moving of the ethernet cable in another network switch, even temporary, will stop the communication between the VRM and BVMS and could lead to issues. (e.g. No recording /iSCSI Target unreachable etc.)

When using Bosch cameras for IVA Calibration performed with Bosch Configuration Manager 7.70.0090, the Scenario selection is not there anymore, and by default it selects bird's eye view.

Find out from this article what should be done when the MIC IP STARLIGHT 7100I cameras pan but do not tilt

The wiring and installation details in this guide are based on common practices used at sites to ensure proper surge and lightning suppression.

If you would like to exclude certain Events and Alarms from being written in the BVMS logbook you do have the option to exclude such information.  

This article contains different Q&A regarding the Camera certificate in Config. Manager & WEB GUI: size limit, supported formats and limitations.

After a power outage/ reboot, all PTZ cameras will get back to their zero-point (home) position. If your PTZ camera was installed looking at a wall, in case of a power outage it will return to its home position where its image is pointing at the wall.

The RCP documentation can be found in the Firmware .zip file on the product page.

This feature is not available in BVMS 10.1. You cannot do it automatically for multiple cameras. You can do it one by one manually through Config Client.

Find out from this article if is it possible to get a raw video stream from a Bosch camera