Security: Video

This article provides an answer to the question: Can I install Intelligent Insights into DIVAR IP all-in-one 5000?

Follow this article to find out what you should check and do if your 3rd party camera is flashing between image and Bosch logo in Operator Client

This article presents how to find the Intelligent Insights version installed on my unit.  

The HDD compatibility list for DIVAR AN 3000 and DIVAR AN 5000 in the Operations Manual, page 166 or you can find it through this article. Have a look!

Starting with firmware 6.51.0026, clearing passwords was changed to only reset service user level password.

White cameo in BVMS Operator Client or "device failed" message may be caused by the NVIDIA graphic card driver that might not be compatible.

Log4j 1.2.17 is not actively used or called by the SQL Server or by the BVMS. This means that the vulnerabilities are not exploitable unless you install some additional components that refer to the vulnerable component. Therefore, there is no risk of exploitation within the SQL Server or BVMS environment.

Are AMD CPUs / GPUs supported by the Bosch Dewarping plugin for Milestone XProtect?

“Error: Discontinuity in network stream!” appears randomly on the monitor/s connected to the VIDEOJET Decoder 7000 (7513). What could be the likely cause of this?

Find out from this article how you can get customized audio files to be used in the "play audio" action from Bosch Alarm Management

This article provides an ansswer if can I create an Intelligent Insights report containing hourly data for every day.

It is only possible to configure a single time server per BVMS system to be used as time source for the VRM encoders.

The connection of 2N® Helios IP intercom to BVMS and Bosch Access Control System is possible thanks to the implementation of ONVIF and Wiegand protocols, which ensure mutual compatibility.

If replacing a defective camera, the camera must be the same IP address as the defective device, and it cannot contain a GUID from a different VRM.

This web page is for information only, so none of the fields displayed can be edited. Although this information is also included in the Log files, this view provides some valuable information at a quick glance.

Any modification of the DIP unit IP, adding of a Network Dongle, moving of the ethernet cable in another network switch, even temporary, will stop the communication between the VRM and BVMS and could lead to issues. (e.g. No recording /iSCSI Target unreachable etc.)

The detection distance (based on the pre-defined requirements*) depends on the focal length and the size of the of the gun. 

For bullet and dome cameras the clear window / bubble is generally made out of polycarbonate with a special hard coating to provide scratch resistance.

This article provides a solution regarding why the systems aren't showing up on the dashboard in my Remote Portal account.

By setting a low Frame rate and a long GOP, this affects the replay.  On the flip side high frame rate and short GOP can show pulsing Live video: 30 FPS @ GOP 10 = 3 I-Frames per sec (the video could appear pulsing; the Monitor refresh rate could also play a role here)