Security: Video

This article describes all the steps that will help you to create LUNs after RAID failure.

The audio file can be played using the RCP+ command CONF_AUDIO_OUTPUT (0x09b9), payload=4 (Sample), which can of course also be sent to the device itself using ATSL scripting.

For Scriplets (because they are process of BVMS): .NET 4.8.  For SDK App: BVMS SDK .dll is compiled in .NET 3.5; .NET 4.8 can be used because it is backward compatible

This article presents step-by-step how to check the status of the RAID array via LSA, replace & rebuild the faulty HDD (DIP 6000 AIO).

Starting with firmware 7.10, an option to export from RAM recording buffer allows recording exports on the fly without requiring an SD card or external iSCSI storage.

⚠️ NOTE: This procedure is the same for all 2U and 3U systems and is also applicable for DIP 7000 AIO GEN3 , except 3108 FW might be different, depends on the exact model.

Does your camera show you the live view as in the image below? During day time (Color-Mode), the image is good, but as soon Night-Mode kicks-in and the IR-LED's turn on, the reflection is noticed.

The detection distance (based on the pre-defined requirements*) depends on the focal length and the size of the of the gun. 

In this article you will see how to import project files into Configuration Manager in both versions: v6.10 & v7.41  

If you have for e.g. a SNC-EM642R camera and you want to find out which device packs you need for your entire solution, follow the steps from this article.

Depending on the 3rd party cameras’ capabilities, there are different ways of adding cameras to Bosch Alarm Management.

This article lists the concrete instructions for collecting logs or other important information for issues with DIVAR IP. We will classify the different issue scenarios . Depending on the issue, this article lists the required logging to start the initial troubleshooting process.

Prior to receiving any type of support, the customer needs to be informed that he/she must have a valid SMA (Software Maintenance Agreement)

Check this article and find the compatibility matrix between Bosch cameras and Milestone

The package updates to the latest recovery image (app0), regardless of which app1 or former app0 firmware is running on any CPP4, 6, 7 or 7.3 platform.

This article describes how to connect with for example VLC-player directly to the Multicast group where the Encoder is streaming into.

When trying to open the SuperDoctor app, the default browser opening is Internet Explorer and the login page is not showing up. "This site is not secure" message occurs and there is no possibility to continue to the localhost.

The following steps have to be performed in order to use an updated software installation package on a DIVAR IP all-in-one 7000 3rd generation video management appliance.

If you have a DIVAR network/hybrid 2000/3000/5000 recorder and you want to connect and configure it, you can do it with the internet explorer compatibility mode in Microsoft Edge and you can use the system as before.

Depending on the FW version of cameras and BVMS version you have installed, different possible situations can occur such as: the cameras are not working because the firmware is old, Configuration Client will display a message like: "unknown platform", Gaps in recordings or not recording at all and so on