Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    100% helpful (1/1)
    ‎11-06-2018 12:51 PM
    Symptoms When scanning a QR or Data Matrix code on a label using the Project Assistant app, it can happen that you get an error message that the MAC address cannot be found (1) or that only part of the address is correctly extracted (2). Diagnosis  First of all, there are different types of labels: product labels (on the device) box labels (on the outside of the box/packaging) installer / UX labels (inside the box /packaging) Symptom (1) can only happen when scanning a product label because some QR or Data Matrix codes do not contain a MAC address, depending on the product, even though the MAC address is available in plain text right next to the code.   The box and installer label codes, however, always contain the MAC address information. Symptom (2) can happen when scanning certain installer labels due to legacy formatting. Solution We have further standardized the labels so that the symptoms mentioned above will be resolved. There will be a transition period, however. As an alternative for symptom 1, you will have smooth experience when preferably scanning the box label. If you encounter symptom 2, we ask you to enter the MAC address manually or use the December 2018 release of the Project Assistant (version 1.2) PS: For full transparancy on QR code / Data Matrix content and/or troubleshooting purposes, you can use conventional code scanning apps available in the resepective app stores.
    View full article
    ‎10-22-2018 05:03 PM
    Learn how to design a network on which BVMS can run comfortably.
    View full article
    ‎05-22-2018 04:57 PM
    Related Products DIVAR AN 3000 DIVAR AN 5000 How to configure Monitor B output for Divar AN 3000-5000 Solution see attachment.
    View full article
    100% helpful (2/2)
    ‎09-10-2018 01:43 PM
    Use the project assistant to commission multi-camera projects and generate project reports. Available for Windows and iOS and Android. (status 2018-08-06 / Version 1.1)
    View full article
    ‎09-10-2018 01:37 PM
    The name that you assign to a camera in the Project Assistant is currently not displayed in the Configuration Manager device list.  This will be fixed with the next version of the Project Assistant, which is planned to be released in November 2018.   Current experience: Setting camera name in Project Assistant   Current Configuration Manager view (based on Project Assistant version 1.1) Camera name is only displayed in the "Camera name" section on the right-hand side, not in the device list on the left. You only see the camera's IP address.
    View full article
    100% helpful (2/2)
    ‎07-13-2018 10:55 AM
    Collection of FAQs for the Video IT Products DIP 6000 & 7000, DSA E2700 & E2800, HP Workstations and HPE Servers
    View full article
    ‎06-07-2018 10:33 PM
    How to terminate a M12 connector for FLEXIDOME micro 5000 MP? Both RJ45 and M12 plug connectors are available with IEC 11801:2002 Cat5 compliance. This further simplifies the concurrent use of both connector types within a single system. Assembly consists of three easy steps, none of which require specialist tools. The plug connectors, compliant with all standards and fully shielded against EMC interference, are available in four-pin and eight-pin configurations. They can be connected to flexible or rigid wires, with sizes ranging from AWG 26 to AWG 22. This makes the connectors suitable for all Industrial Ethernet transmission systems, Ethernet-based fieldbus systems such as Profinet, and EtherNet/IP up to gigabit speeds. The M12 Quickon connector provides a sturdy metal housing with a plug-and-turn mechanism. A 360 degree shielding connection with an iris spring means the connector is well suited to system environments with large amounts of EMC interference. The compact design of the RJ45 Quickon connector, on the other hand, makes it suitable for horizontal or vertical multi-port connection (as is frequently required by switches, for example). Connector ID rings are available in eight colors to visually aid patch-bay layout. 
    View full article
    ‎05-21-2018 08:47 PM
    Can I upgrade existing BVMS Pro system to a BVMS Enterprise system?
    View full article
    ‎05-21-2018 08:46 PM
    Related Products - VJD-3000 Question How to display MPEG 4 video on VIDEOJET decoder 3000 ? Answer No. VIDEOJET decoder 3000 is only capable of decoding H.264 video.
    View full article
    ‎05-21-2018 08:40 PM
    This will let you call up cameras on an Allegiant monitor output across the network to a remote site.
    View full article
    ‎05-21-2018 08:36 PM
    Related Products Bosch Recording Station (BRS) version 8.9 and later   Question I cannot configure UDP tunneling on BRS. Network cards are grayed out.   Answer Under certain circumstances BRS NetLimiter may become not registered. The network cards are not shown in Configuration > Security and Network > Network settings. In that case, register BRS NetLimiter manually: 1. Close BRS application 2. Control Panel > System and Security > Administrative Tools > Services > Bosch Networking Service    a) Set "Startup Type" to "disabled"    b) Stop service    c) In a console window with administrative rights, enter "C:\Program Files\Bosch\Recording Station\NetLimiterServer" /service    d) Set "Startup Type" to "Automatic"    e) Start service 3. Start BRS application
    View full article
    ‎05-21-2018 08:33 PM
    Connections and programming for VIP X1XF and VG5 600 Dome.
    View full article
    ‎05-21-2018 08:31 PM
    Related Products DiBos version 8.0 to 8.7 BRS version 8.8 and later   Question How to configure LDAP in DiBos / BRS?   Answer See attached 8 screenshots which guide through the LDAP configuration. Known restrictions on the AD: - users and user groups must be located in the same directory in the AD - DiBos / BRS supports max. 1000 user groups in the AD - Comma separated user (ex. User, John) are not supported.
    View full article
    ‎05-21-2018 08:30 PM
    Related Products DVR 700 series BVIP device   Question Why does Divar 700 change the settings of 2nd stream, even though only 1st stream is configured in the DVR?   Answer Divar 700 uses the concept where it assumes to be the (master) device to have control over the cameras and their streams. Stream 1 is always set to profile 1 Stream 2 is always set to profile 2 Only one command is sent from DVR to set both stream 1&2 So please configure profile 2 in the wanted way to be used with stream 2.
    View full article
    ‎05-21-2018 08:30 PM
    Related Products VIPXD (Audio Version)   Question Why there is NO sound from a loudspeaker connected to a VIPXD SPK port?   Answer The RTC_AUDIO_LOUDSPEAKER_ON_OFF flag is not activated. This flag can be set manually by using this CGI command: http://160.10.x.x/rcp.xml?command=0x09be&type=F_FLAG&payload=1&direction=WRITE&num=1 Replace 160.10.x.x by your VIPXD IP address.
    View full article
    ‎05-21-2018 08:16 PM
    Related Products VRM Question Can I import Direct-to-iSCSI recordings into VRM? Answer No. iSCSI arrays used in Direct-to-iSCSI recording mode must be formatted when imported into VRM.
    View full article
    ‎05-18-2018 07:48 PM
    Related Products Bosch Video Client (BVC) Question Where can I find my stored recordings?   Answer Default path of the recordings is set as: C:\Documents and Setting\Admin\My Documents\Bosch\Video Client\Recordings This path can be changed in the configuration manager under the tab System > Applications > Video Client > Application > Manual Recording
    View full article
    100% helpful (2/2)
    ‎05-18-2018 01:49 PM
    Related Products All IP encoders Answer Copy/Paste the selection below to your alarm task editor and save. This script will make your encoder trip relay 1 only when IVA rule #1 alarm is active. // Set TempState to monostable mode, 5 seconds OperationMode monostable := { High(50) }; TempState(1) := monostable; if (VCARule(1,1)) then TempState(1) :=true; if (TempState(1)) then Relay(1) :=true else Relay(1) :=false;
    View full article
    100% helpful (1/1)
    ‎05-18-2018 01:41 PM
    Related Products All IP encoders   Answer Copy/Paste this example into the alarm task editor and save.  See comments below for more details, annotated by //. // Settings for JPEG posting JpegPosting PicPosting := { IP( "put ftp FQDN servername or IP here" ) Login( "anonymous" ) Password( "anonymous" ) Format( Large ) FileName( "Snap" ) Suffix( Date ) Camera( All ) }; // Define Operation Mode to periodic, 15min low and 0.1 second high OperationMode periodic := { Low(18000) High(1) }; //define logic TempState(1):=periodic; if(true) then TempState(1); if (TempState(1)) then PicPosting;
    View full article
    ‎05-18-2018 01:39 PM
    Related Products Bosch encoders Answer Place this in the alarm task editor and save it.  Please read the comments for more details.  They are noted below by //. //Define weekly timer from Monday to Sunday from 7am to 9pm Timer weekly := {TimeBegin(07:00) TimeEnd(21:00) DayBegin(Mo) DayEnd(Su) }; //define what is to be recorded Recording recording:= { Camera(All) }; // Define Operation Mode to periodic, 1 sec low 30 min high OperationMode periodic := { Low(10) High(18000) }; TempState(1):=periodic; //define recording timer OperationMode monostable := {High(50)}; TempState(2):=monostable; //Turn on recording timer if (IsActivated(weekly)) then TempState(1) := true; if (TempState(1)) then TempState(2) := true; if (TempState(2)) then recording else Stop(recording);
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist