Security: Video

Similar to VRM eXport Wizard 2.0,  encrypted and unencrypted VRM recordings can be exported (VRM block export) from any video surveillance system based on Bosch Video Recording Manager (VRM) and exported recordings can be converted to mp4-files.    VRM eXport Wizard 2.10 introduces a new look and feel of the graphical user interface and some UX changes. In general, the VRM eXport wizard is a software tool that allows you to export video directly from the VRM and to convert exported video data to mp4. You can find the VRM eXport wizard setup file in the VRM Master Installer or in the bonus directory of the BVMS zip file. Exports made with the VRM eXport Wizard 2.10 can be open in BVMS (Viewer) 9.0 or newer. In this document we describe how to use the VRM eXport Wizard for either export of video data and conversion of the exorted video data to mp4. With the VRM eXport Wizard 2.10 encrypted and unencrypted VRM recordings can be exported (VRM block export) from any video surveillance system based on Bosch Video Recording Manager (VRM) and exported recordings can be converted to mp4-files. Therefore, the VRM eXport Wizard 2.10 offers - similiar to the previous version - the following two options, compare also Figure 1: Export Video Recording Manger recordings of cameras Convert already exported data to MP4 files

If you have configured an out of the box system and once the configuration was done you wasn’t able to access the BVRAdmin account, this article will help you to find a solution. Access to BVRAdmin account is required to perform administrative tasks on the operating system. This requires the following steps:

Check this article and have a look at the attached documents which describe the settings you must perform after having installed BIS and BVMS on the different computers.

In many cases a minimum and maximum retention time needs to be defined in a video surveillance systems due to legal requirements. While the minimum retention time defines the time period for how long video recordings need to be stored, the maximum retention time defines after which period of time the recordings have to be deleted. Thus, the minimum retention time is going to influence the amount of storage needed. The higher the minimum retention time the more storage space is required.

To guarantee high quality imaging through the entire range of products, Bosch Security Systems uses a Common Product Platform (CPP).

This article describes how a Tattile camera can be connected to BVMS. We recommend keeping the Tattile camera documentation and BVMS configuration manual at hand to fine tune the system configuration to the specific needs of your project

This article explains step by step how to remotely connect to DIVAR Network or Hybrid via Divar Mobile Viewer App

Find out from here what to do if your FLEXIDOME Multi 7000i or FLEXIDOME Multi IR is coming offline sporadically/ disappears from the network

This article contains documents attached which describes the installation package for BVMS. Operating system support of the specific BVMS version is listed in the BVMS release notes.

This article explains the difference between Wide Dynamic Range, High Dynamic Range and Bosch HDR X.

If you have a DIVAR network/hybrid 2000/3000/5000 recorder and you want to connect and configure it, you can do it with the internet explorer compatibility mode in Microsoft Edge and you can use the system as before.

In the past (prior to Windows Server 2012 R2), in order to perform NIC Teaming, we would have needed two adapters which were from the same vendor, and a third-party software that would make the teaming possible and present the OS with just one “virtual” network card.Now from Windows Server 2012 R2 and up, this is built-in and its hardware agnostic. This means you can use whatever network cards you want and the teaming will work like a charm.

This article provides a background information about syslog, tips for 3 rd party Syslog server options and step by step instructions how to configure, activate and collect the syslog.

This article explains briefly the basics of SNMP. Declares the basic terms of the protocol. It also explains what part of the protocol is supported by Bosch cameras.

This Authorization Letter is applicable for all Bosch Security and Safety products & software when a password reset for them is requested by customers, system integrators or by a local sales representative.

This article provides you with information related to the Windows Firewall, how to access, configure and adjust it.

Download BVMS Lite from the Download Area and use the quick installation guide to set-up the system.

The MegaRAID controller will automatically detect if a disk has errors causing the RAID volume to be degraded. An error message will appear on the desktop of that system. The system will also generate a beeping sound indicating it needs attention:

Bosch Remote Portal connects you to your Bosch Security devices from anywhere and lets you perform remote administration and maintenance anytime

New generation of Bosch cameras: no default password, the user has to create one