Security: Video

In this article it is explained in a step-by-step guide how to activate the needed services in Remote Portal to be able to connect the cameras to Bosch Alarm Management.

This article contains the options for physical/ default reset of Bosch Inteox cameras.

This article describes how can you disable password Policy for Cameras/ Encoders and provide compatibility with older/ 3rd party systems.

⚠️ NOTE: This procedure is the same for all 2U and 3U systems and is also applicable for DIP 7000 AIO GEN3 , except 3108 FW might be different, depends on the exact model.

This article describes the different components that Bosch Video Management System offers to to establish a connection between Bosch Video Management System and a 3rd party management system. This description helps you in writing your own commands for controlling Bosch VMS from inside your management system.   

You may need the SNMP MIB file when you are trying to monitor the camera through a Bosch or 3rd party software. This article aims to describe how to find and enable the SNMP on a Bosch camera.

From this article you will find out how to set up the IP Matrix configuration on the VIDEOJET decoder 7000 (VJD-7513) using Configuration Manager.   The built-in IP Matrix functionality, together with a connected keyboard, allows VIDEOJET decoder 7000 to run as a stand-alone system. An operator can manage up to 32 cameras via the keyboard without any PC or management system required. System setup is quickly done with Configuration Manager. After that, no PC is required to run the IP Matrix   Note: According to the Release letter (Firmware 9.51) of VJD-7513, VIDEOJET decoder 7000 supports IP Matrix application as built-in feature. According to the Release letter (Firmware 54.8.02) of VJD-7000, IP matrix remote monitor is only possible with UDP. TCP not supported. ** VJD-7000 can be used as an extended monitor to IP Matrix in single and quad view. Please check also the following article and find out: Which are the system requirements for configuration/ operation of VIDEOJET decoder 3000/ 7000/ 8000?   A single system can support: 2 physical monitor displays One KBD-Universal XF keyboard 32 cameras 32 camera sequences 9 favorite views

This articls provides the steps to update a DIVAR IP system. The firmware version 3.180.05-1562 can be used with the LSI MegaRAID Controller. 

Welcome to the 3.3 release of Video Security for Windows, Android and iOS. There are new features and bug fixes in this release, some of the highlights are described in this article!

This article explains how you can collect VRM logs in different versions of it

If you have CPP4 cameras with 6.11 firmware (FW) version and you need to upgrade them to the latest version, normally you have to upgrade to an intermediate firmware version first. But where you can find this firmware ?

The attached documents from this article describe the exact functionality that BVMS system provides.

This article presents the comprehensive steps of DIVAR-IP all-in-one System Manager and Remote System Management installation and configuration

This article aims to define the way you can display camera video via decoders. Moreover, fifteen different settings scenarios and their effects will be outlined for the live video to be displayed through the decoder.

This Authorization Letter is applicable for all Bosch Security and Safety products & software when a password reset for them is requested by customers, system integrators or by a local sales representative.

This article will guide you to setup a App password usage from your Yahoo account which you can use the generated password for Bosch IP camera alarm email notification setup.

The following procedure describes how to restore DIVAR IP 5000 ALL-IN-ONE to the factory default image.   Step-by-step guide   1. Start the unit and press F7 during the BIOS power-on-selftest. The Recovery menu is displayed.   2. Select one of the following: – Initial factory setup: restores to factory default image and deletes all data on the HDDs. or – System Recovery (back to Factory Defaults): restores to factory default image; data on the HDDs will not be deleted.   Note: While the System Recovery option doesn't delete video footage stored on the data HDDs, it still replaces the complete OS (operating system) partition (including VMS settings) with a default configuration. In order to access existing video footage after recovery, the VMS configuration needs to be exported before System Recovery and re-imported afterwards.   Notice! Do not turn off the unit during the process. This will damage the Recovery media.   3. The unit starts from the Recovery media. If the setup is successful, press OK to restart the system.   4. Windows performs the initial setup of the operating system. The unit restarts after Windows has completed the setup. 5. After the restart of the unit, the factory settings are installed. 6. After the system has reboot, the next step is to change the BVRAdmin password. The default one is WSS4Bosch.

This article describes how can you check the status of your SMA for BVMS version≥11.x via Remote Portal.

Check if your system is performing correctly! The VRM Monitor is one of the best options to check if the system is recording correctly, providing a quick overview as well as detailed information about all the cameras and storage added to VRM. In this article you are going to see how to access VRM Monitor from Bosch Video Management System (BVMS) Configuration Client. Furthermore, you will find here some useful information about each section on the Dashboard page.

Follow the steps from this article and find out how you can license BVMS Viewer v.11.0  or above for free.