This article helps you to activate the purchased licenses (MBV-XSITEPLU-100) if the unmanaged site expansion licenses were not introduced During the introduction of BVMS 10.0 (BVMS Plus)
This article explains what you can do when the message:“The number of windows in this view exceeds the maximum limit set in the system parameters” appears in Operator Client with minimum 2 Monitors.
This article describes the mechanism of ANR 2.0 and how it can be set up. In the following ‘camera’ is used as a representative for all video source devices supporting ANR 2.0.
This article shows how you can use the Project Assistant to remotely commission the FLEXIDOME IP starlight 8000i camera, including set up and adjustments of field of view.
Welcome to the 2.3.0 release of Project Assistant for Windows, Android and iOS. There are many new features and bug fixes in this release that are detailed in this article.
For larger projects, where many cameras need to be commissioned, the question might come up on how to tackle it in the most efficient way using the Project Assistant.
One of the main bugfix reasons to use VRM 03.71.0029 is a fix in regards to correct display and replay of recorded clips in continuous and alarm recording mode.
This article describes the considerations that need to be taken into account when designing a video surveillance system that is suitable for person identification.
Follow this article and find out what to do if the Bosch VRM Monitor page does not open correctly, but instead displays an Error and the video is always Black.
Our portfolio contains quite a variety of (mobile) video clients and applications. To get a fast first overview we created the attached table to compare the most important ones.
Use the Microsoft Event Logging! When an error occurs, you can use the event log to help determine what conditions caused the error and identify the context in which it occurred.