Security: Video

Use the project assistant to commission multi-camera projects and generate project reports. Available for Windows and iOS and Android. 

This article is focused on a method of creating a new profile with own parameters and make this new profile active.

If BVMS and VRM are installed on the same machine, it is needed to change the TCP Port of the VRM Monitor.

Have a look in this article to learn how you can add ONVIF cameras to Configuration Manager through VSG managed by VRM.

Starting with BVMS 10.0, ONVIF encoder events can be retrieved from VSG or ONVIF encoder directly. Additionally to ONVIF profile S, BVMS 10.0 supports ONVIF profile T.

This article lists different ways to connect to cameras Live/Playback using the Video Security Client/App: to DIVAR IP AIO/BVMS system or to Camera directly, bypassing DIVAR IP AIO/BVMS system.  

 This article shows the keyboard shortcuts that can be used by operators when operating the BVMS system. 

This article describes the absolute minimum information we need in order to start analyzing and optimizing Video Analytics performance

Our portfolio contains quite a variety of (mobile) video clients and applications. To get a fast first overview we created the attached table to compare the most important ones.

Operator Client helps you display the original full image circle of a panoramic camera, its image dewarped or you can select a point of interest of the image.

Video Recording Manger v4.00.0070 does not allow anyone not configured in VRM, only as an admin (using Configuration Manager), to log into the VRM Monitor page.

  Important note Currently, the VRM is itself very seldom used in combination with Genetec. Starting with 2022, Genetec developed a new driver for Bosch cameras “Hybrid driver for CPP13/14+”. With this, the VRM is not considered anymore. With the old “Legacy (CPP7.3 and older) the VRM is still supported.      Related Products: VRM, Genetec Security Center Overview: It is possible to use VRM free of charge (no extra VRM license is required) within Genetec Security Center. Genetec is sending encrypted secret to the VRM server with the number of the licensed channels. When VRM receives and validates this, it can be used for that number of channels for 24 h. A periodic license update is send by Genetec, so the VRM licensing is guaranteed as long as it is used with Genetec Security Center. Default settings, if not extra configuration is needed or done. -License for 1000 Cameras - License update is done every hour   How to license more than 1000 cameras or change the license update period for VRM within Genetec Security Center: Open the Config Tool and Launch a Video Task Select the Archiver Go to the Resource Tab and click on Extensions From the Tab Installed extensions select Bosch. In the Tab VRM add a new VRM and/or select already configured VRM. Click on Advanced settings and add the following parameters If you need to license the system with more than the default 1000 licenses – create the parameter with Name VrmLicenseRequestCount and as value put the required number of licenses. The parameter name is case sensitive If you need to change the duration of the period between each license request (there is always one license request when the archiver starts) – create the parameter with Name VrmLicenseRequestPeriod. The duration of the period is in milliseconds. The default value is one hour. If the value is set to 0, the license request are disabled. The parameter name is case sensitive     Press Enter to confirm the entry and then Close Press Apply and then OK. At the webpage of the VRM one can check if the number of licenses is changed. If you would like to know how to replay the recordings from a Bosch camera managed by Bosch Video Recording Manager (VRM) in Genetec Security Center software, please follow this video: How to use VRM recording in Genetec Security Center   Note:  To support customer needs and to leverage the most important features of Bosch cameras (like data security, Video Analytics, and intelligent bitrate management), the agreed focus of Bosch and Genetec is on the Genetec Archiver Recording Solution. Current and future developments are focused on this recording solution and the VRM in Genetec will only be supported to maintain existing and upcoming projects where a VRM solution is selected. There will be no development of new features. In this maintenance mode, the following is possible: • Certification of new VRM versions (for projects)* • Certification of new DIVAR IP’s* *Requirement: stable API on VRM side Note: The VRM itself might offer more functionality not covered with the integration in Genetec.

The System Info File is requested during the BVMS license activation via Remote Portal and can be downloaded by following the steps described in this article

Find out from this article in which situations the MAC address cannot be found or only part of the address is correctly extracted in Project Assistant when scanning a QR or Data Matrix code

This article contains the step-by-step guide related to the MP4 Video Export from Video Security Client to your PC (Windows) in a local directory. In this article, the Video Security Client is connected to the Remote Portal and explains how you can export video from cameras connected to your RP account.

Video Security Client is the market’s easy to use video surveillance application provided by Bosch for local and remote monitoring of IP cameras and appliances. The software supports small systems from 1 to 128 sites with up to 256 cameras each. Also, you can use Video Security Client being connected to your Remote Portal account. Follow this article and find out the limitations and how can you connect your Remote Portal account to Video Security Client.

Here we describe the steps that would be need to be done to successfully move VRM to a new server.

This document is specifically for DIP-73xx as it's the only DIP with Software Center. The document details how to upgrade all the way from BVMS 10.1 with Software Center and to BVMS 12.1/ 12.2 with System Manager 2.3 

Intelligent Insights is a standalone product. The system can run as a standalone system and be accessed by operators via the web browser or the widgets can be integrated in a BVMS operator client.

This article explains how to find the source (details of the workstation) and credentials that are used to attempt to login into BVMS (when the attempt has failed)