Security: Video

This article presents where are the Transcoder Log settings and how to enable them for log collection.  

This article explains why the Live view shows ‘Authentication failed’ in Video Security App.

This article presents what symptoms appear in BVMS Operator Client if Time synchronization is wrongly set. Also provides some recommendations about what to do to avoid this symptoms. 

This articles explains what does the User Name column indicate in the BVMS Operator Client LogBook.

Is there a way to request for the panoramic camera de-warped snapshot via URL?

This article lists the concrete instructions for collecting logs or other important information for issues with DIVAR IP. We will classify the different issue scenarios . Depending on the issue, this article lists the required logging to start the initial troubleshooting process.

After configuring the Virtual mask in the web browser of Bosch CPP7.3 camera and afterwards going back to the Live view, the Virtual mask appears as Privacy mask and is not transparent and other inappropriate behaviors have been noticed. This happens on the Bosch CPP7.3 cameras that have FW version older than v.7.86.0019

This article it is about analog control system connected directly to the MIC IP serial port. The serial com ports of traditional analog systems head end control systems connect directly to the RS485 input of the MIC IP models listed within this article.

Camera integrated as NTCIP with SUNGUIDE software works great, but as ONVIF there are issues with the focus. When trying to adjust the focus from the SunGuide software, there are no changes with the camera image.

This article explains where to find the Serial-No. of a system. The BOSCH sticker is most important.  For registration and NetApp case creation of the DSA E2700 and the DSA E2800 units only the NetApp S/N of the Controller base unit is relevant. 

This is a living document and the list will be constantly updated. Details can also be found in the BOSCH Product catalogue:

Check this article and find out how you can avoid displaying black image in Operator Client BVMS v11.0

At the initial setup of DIP 7000 AIO R3, when the Software Center has to be installed,  you might get the “Certification Check Failed” error message.

This article presents what parameters to set in BVMS on a new Stream Quality profile.

This article shows how  the image quality of AUTODOME inteox 7000i & comparison with AUTODOME 5000i IR camera image can be improved.

Can I display more than 1 camera on a single Monitor of Decoder VJD-7513 in BVMS 11.0 when an alarm is triggered?   System Overview: BVMS 11 1 monitor connected to 1 x VJD-7513 that is part of a Monitor Group The monitor has a layout consisting of several image panes Desired status: when an alarm is triggered → pop up the image of the 4 cameras on the same decoder monitor

This article contains a step-by-step guide which explains how you can do the setup for the camera's live view image pane to be displayed in full screen in the Operator Client if a motion alarm is triggered on that camera,

Windows 11 Pro is now officially supported as OS for BVMS 11.1.1 Operator Client

This article explains step by step how to set Bosch Cameras & Divar network 2000 & UML-245-90 monitor to be able to retrieve audio.

This article answer to the question: Why am I unable to see the Dewarped view mode menu in Live web GUI of FLEXIDOME panoramic 5100i IR?