Security: Video

Time zone drop down is greyed out and it's not possible to reconfigure the Time Zone on the DIP-44/64 after installing BVMS 12.1 and enabling UAC.

Yes, it is possible to do this setting (minimum TLS) to multiple cameras at once in Configuration Manager. You can do this change after you authenticate on those cameras. Learn more!

Be sure that the MIC-7100i camera is configured in BVMS Configuration Client with "Bosch-AutoDome Bilinx" protocol and not with "Bosch-AutoDome" protocol or other options from the list.

The Advanced Video View+ license doesn’t work at site level or per user basis and can be activated per camera.

Using the Internet Explorer 11, there is video from all 4 channels in configurator and event monitor, but audio from the camera is present only on channel 1. Since Internet Explorer 11 is EoL, this behavior will not be changed/ improved.

Please note that the relay output of the IO Alarm card is a dry contact relay (with 24VAC/VDC, 5 A). In order to control another circuit that has a 230V you can't do that directly because its higher than it was design for. In order to safety control a 230V, you could use a 24V on that output and control an additional/external relay: powering its coil this relay could switch the 230 circuit of the washer.

In the winter period, if there is no PAN functionality in the camera and despite this, the TILT still works, this could be caused by the snow or ice that might be stuck between the static part of the camera and the moving camera head. Find out from this article how you can prevent this happening.

Bosch requires the installer to provide the specified power mentioned on the product spec sheet and labels. While taking into consideration the POE standards. Bosch doesn't support out-of-spec operation of our cameras as we cannot guarantee proper functionality in such circumstances. Thus, we will not be providing out-of-spec voltage or power values at this stage.

You can create a Command Script using the following scripting languages: C# and VB.Net You cannot change the scripting language of an existing Command Script. You can create a Client Script or a Server Script. You can add multiple scriptlets to every script.

In this article you will find attached an example of scriplet that turns BVMS Operator Clien in full screen mode and creates and displays a simple favorites of one camera

Configure BVMS Operator Client credentials, so the application starts without requesting username and password and add the shortcut path of the BVMS OC to the Windows start up directory

The MBV-MBase is the license that allows you to extend the SMA in Remote Portal. You receive this license when you place an order to Order Desk for SMA extension and it must be activated in the Remote Portal and on the server like any other license.

BVMS Desktop screen (BVMS Kiosk screen) has several customization possibilities for introducing a company logo picture and a custom text, as well as selecting if an application icon will appear on the screen or not.  Follow this article to see the guidance on how to make these customizations.

The RCPP command to enable/ disable the privacy masks is CONF_PRIV_MSK_POLY - 0x0bd8. Follow this article to see the rcpp command to enable & disable the privacy mask of a Bosch camera (moving or fixed).

Check this article to learn about what to do when a FLEXIDOME multi 7000i (IR) or FLEXIDOME panoramic 5100i (IR) does not boot up or is unresponsive.

If you have for example a DIVAR 7000 AIO as central BVMS server and also, on the same network, you have a DIVAR Network Video Recorder (NVR) to which cameras are connected to and recording, the recording is typically handled by the NVR itself. Therefore, in this case the cameras added on the NVR will continue recording only there because the NVR manages the recording and storage of video footage from them.

MVS gets error message “Videoprovider not available” when trying to log on. Also, the BVMS Configuration Client shows the X mark on the MVS. What to do?

In order to enhance user experience and security for all connected recording and management systems, Bosch has upgraded the cloud and service infrastructure. As a result, existing connections between DIVAR IP all-in-one systems and Remote Portal were terminated on February 15th 2024 and will need to be restored.

The maximum zoom speed in the GUI is operational but is only applicable during "manual control." When the operator calls for 30x, the zoom speed has to remain constant. While the speed may not be as rapid as anticipated, it is essential to understand that this camera model is already operating at its optimum capacity.

If the ‘decoder offline’ message occurs during the FW upgrade from 54.7 to 54.8,  try to use another version of Configuration Manager, or remove the password temporarily.