When entering in BVMS Operator Client, the camera's image is black and only Transcoding option is available for streams (no stream 1 or 2 , or image pane optimized)
Desired result: See the camera's live image
If the Host Type was set to other value than “Factory Default” for DSA E2800 and you want to integrate it with BVMS, the targets will most likely not be scannable and there will be no recordings at all.
The System Overview and Dashboard page shows all available data of your camera.
Find more useful information about FLEXIDOME multi 7000i camera from this article!
This document contains information on what situations might happen if no alarm events from a Live Intervention, Video Verification or Virtual Assistant services appear in the Alarm Management Operator Interface and how to advise.
Intelligent Audio Analytics feature is available for FLEXIDOME 5100i panoramic cameras. This feature is available on camera firmware starting with version 8.80.
Regular BVMS 12.0.1 installer will not run on any DIVAR IP all-in-one platform. The upgrade shall be performed via DIVAR IP System Manager application.
Keep in mind: If you want the latest version of BVMS, it must be downloaded and applied with the latest version of System Manager.
If for any reason, later on the DIVAR IP needs to be removed from Bosch Remote Portal connected via System Manager, follow the steps from this article.
This article explains where you can find the Camera Trainer for FLEXIDOME IP STARLIGHT 8000i camera and what settings are needed for CT to be displayed in Config Manager
If you have for e.g. a SNC-EM642R camera and you want to find out which device packs you need for your entire solution, follow the steps from this article.