Security: Video

The "Lens rotation" slider can be used to correct for any manual lens rotations performed during installation. If the lens is manually rotated during installation, the slider value should be aligned with the rotation value shown on the lens.

If the ‘decoder offline’ message occurs during the FW upgrade from 54.7 to 54.8,  try to use another version of Configuration Manager, or remove the password temporarily.

To find out the Windows version compatible with BVMS (Bosch Video Management System), you should consult the Release Letter. BVMS compatibility may vary depending on the specific version of BVMS you are using.

Perform an update in the BVMS setting to pull h265 and the recording should start to show up in the playback cameo from BVMS Operator Client

DIVAR 5000 network or Hybrid do not support KBD-UXF. However, the KBD-DIGITAL is still a current product and can be used.

This articles describes how a BVMS system meets the requirements specified by IEC62676-1.

SecureOS sends events from analytics to BVMS, which can be translated into alarms and/or stored into the logbook.

Related Products Workstations, Z4G4, Microsoft License Question Is it possible to Activate Windows 10 by phone for Bosch Workstations? Answer With introduction of Windows 10, Microsoft disable the phone license activation for Bosch Workstations. Please perform online activation over internet.

Find out from this article what you should do to fix green Image panes in BVMS

The HDD compatibility list for DIVAR AN 3000 and DIVAR AN 5000 in the Operations Manual, page 166 or you can find it through this article. Have a look!

This behavior is mentioned in the release notes and as a workaround you can separate the cameras into different groups. For example, if you have cameras in 2 different locations, it would be actually better to separate the cameras in 2 groups. But please be informed that by doing so, you will not be allowed to view them all together.

‘Status 11’ means that the wiper is blocked and cannot move freely or cannot move at all. Please check if the wiper is working properly and can move freely.

IPMI allows you to remotely monitor and manage certain aspects of the DIVAR IP all-in-one 7000 2U (gen 3), such as power status, temperature, fan speed, and other hardware-related information.

It is not possible to have a custom layout, such as 2 X 3. Supported layouts depend on physical characteristics of monitor and on the set aspect ratio. For example, for a monitor with optimal resolution 1920x1080 the following layouts are supported. Other resolutions may have different values. Any resolutions are supported.

This is a Camera Trainer exercise that shows how you can Train the Camera for paper jam detection on the paper shredder.

An installer doesn’t need to travel to customer's site for fine tuning the configuration, when a Camera Analytics task brings false alarms. The VCA task editor can be used for easy analytic configuration or for troubleshooting.

Forensic search is a way of searching your recorded video for events that have happened in the past using the metadata that the camera has generated. You can use the metadata embedded in the video to reverse the process and search for events using the same or different tasks that VA provide. But, do you know what is the difference between individual & common search?

New menu option "Import from csv file" available when right clicking on a VRM pool within the Device Tree of the Configuration Client. The option is not offered for Live only or Local storage cameras. 

Starting from Firmware v8.80.0090, the file for all CPP14 sub-platforms are now unified into a single file.

You can try the steps explained in this article to create a Task using Task Scheduler from MS Windows