Security: Video

The company & the username on the Assurance Report can be changed from user settings in Remote Portal.

Certificates play a crucial role in enhancing the security, authenticity, and integrity of the operations performed by Bosch Configuration Manager, making them a necessary component in modern networked environments.

Using the Internet Explorer 11, there is video from all 4 channels in configurator and event monitor, but audio from the camera is present only on channel 1. Since Internet Explorer 11 is EoL, this behavior will not be changed/ improved.

The following instruction describes how to configure a data partition from RAID 5 to RAID 6 on the DIVAR IP all-in-one 7000 4th generation. It is not possible to directly migrate from RAID 5 to RAID 6, so the first step is to delete RAID 5 and then create RAID 6.

This article explains what is the URL for the RTSP Stream on the FLEXIDOME Multi 7000i.

This article explains if is it possible to enable Remote Desktop on DIVAR IP all-in-one 6000 and connect on it remotely.

This article explains which is the difference between BVRAdmin lost password versus VRM lost password (reset) of DIVAR IP.

This article explain what to do if "The connection is not secure. Secure connection failed" message occurs in Configuration Manager.

In order to determine the Time Zone values, perform the bit mask operation of the flag value with the combined bit mask value 0x1F800000 as shown below. Bits 23-28 correspond to the Time Zone bits in the Flags.

This article explains if is it possible to change the default port to which Bosch camera can send JPG towards an FTP server.

This article recommends what convertors to use with the Videojet Decoder 7523 to ensure compatibility with KBD Universal XF.

This article is a step-by-step guide about how to access the direct link to cloud recording web interface from Video Security App (VSC).