Security: Video

The purpose of this article is to provide a step by step guide about how to perform backup and recovery procedures of the VRM data base in the DIVAR IP 2000 EZ Recording Appliance.   Step-by-step guide Backing Up the Working Configuration: 1.To backup the working configuration of a DIVAR IP 2000 Recording Appliance, open the Appliance's "Dashboard": 2. From the Dashboard select the "Configuration" tab in the top right hand portion of your browse:

If your DINION IP Thermal 8000 (NHT-8000) camera is reporting blurred/unclear/unsharp images that are randomly appearing during the day, or the night, please follow the steps below in order to fix it.

This article presents step-by-step how to check the status of the RAID array via LSA, replace & rebuild the faulty HDD (DIP 6000 AIO).

This article explains step by step how to do the configuration of a camera & VJD 7000 & Monitor Group integrated in BVMS 11.1.1.

This article gives you the solution to fix the behavior when the recording doesn't work for VG4 AutoDome camera and when the Bosch logo is displayed in the cameo

This article contains all the steps to set up a Video Verification service (triggered by intrusion panel) in Bosch Alarm Management.

The Intelligent Insights widgets can be visualized in BVMS Operator Client. In this article we are going to show you how to add a widget to Bosch Video Management System (BVMS).

This will let you call up cameras on an Allegiant monitor output across the network to a remote site.

Health monitoring with Remote System Management is very easy, as in one page you have an overview of the state of all DIVAR IPs connected to your Remote Portal and then, drilling down a level, you have an instant overview of the state of the cameras connected to the selected DIVAR IP. A service is available to setup health alerts for devices via email, so you are informed when any emergencies pop up.

This article is applicable for all the requests related to third party products integrated in Bosch Video Management System Software over ONVIF.

The purpose of this article is to help you disabling the compass character from the Screen Display (OSD) of the Bosch PTZ camera via its web interface

This document is specifically for DIP-73xx as it's the only DIP with Software Center. The document details how to upgrade all the way from BVMS 10.1 with Software Center and to BVMS 12.1 with System Manager 2.3 

The article describes how to receive analytic events from Bosch cameras in Milestone XProtect.

Follow the steps from this article to set up a Live Intervention service in Bosch Alarm Management.

This recommendation could be applied if the storage is overloaded, as there are several Onvif cameras running through it.

Place the script from this article in the alarm task editor and save it.

Perhaps you are wondering how to set the maximum retention time on a Divar Network? Some of our customers asked about this option. Well, in DIVAR Network and Hybrid there is not retention time. But you can set the automatically deleting time, that is more or less the same.   Step-by-step guide:   Open one Browser and type your device IP address Login with the administrator account Go to Settings > Storage > Recording Fill in the box with the desired automatic deletion time   Another option is to make this change directly in the local interface of the unit.

This article explains how to configure a single camera that already has a fixed IP address assigned, using Project Assistant App.

Bosch Remote Portal provides the VideoView+ Service which allows to display live video, replay of recorded video on the camera, and a forensic search on Video Security Client. Further the Video Security App (on iOS and Android) can receive push alarm notifications triggered by motion in the camera image, for example. This article explains how to configure this service to display live video, replay of recorded video on the camera, and forensic search on Video Security Client via your Remote Portal account.

This article shows how to configure Input Alarm and later search for them in the Event search using Web Interface.