Security: Video

What FW versions did Crowd Density Estimation get removed from IVA Pro? What to use in replacement for Crowd Density Estimation? How to remove the unrecognized task?

Check this article to learn about what to do when a FLEXIDOME multi 7000i (IR) or FLEXIDOME panoramic 5100i (IR) does not boot up or is unresponsive.

The "Lens rotation" slider can be used to correct for any manual lens rotations performed during installation. If the lens is manually rotated during installation, the slider value should be aligned with the rotation value shown on the lens.

Unsupported camera model: Auto-calibration is currently not supported for this camera model. Calibration could produce wrong results or might not work. Why is this message displayed in Configuration Manager?

When looking at the MQTT explorer, the naming of the counters is always as in the first camera, so always "Counter-1-1" and "Counter-1-2".

Find out how to install FLEXIDOME corner 7100i IR camera! The camera is corner-mounted, robust, and ligature-resistant, with a wide field of view that eliminates blind spots and produces high-quality images even in low light.

Intelligent Audio Analytics feature is available for FLEXIDOME 5100i panoramic cameras. This feature is available on camera firmware starting with version 8.80.

Due to an error in the software interface to the secure element chip on the cameras, the chip can be permanently damaged. Follow this article and find out the mitigation of this behavior

This article presents what are the limitations of Privacy overlay in BVMS 12 (Pano cameras, h.263 & MPEG, decoder, VSC).

IVA pro Buildings pack and Traffic pack on CPP14 use the following resolutions: 1280x720 resolution for 25/30 fps base rate,  1024x576 resolution for 50/60 fps base rate.

Intelligent Video Analytics (IVA) Pro provides application-specific packages for building security and operations (IVA Pro Buildings), perimeter security (IVA Pro Perimeter), and traffic monitoring (IVA Pro Traffic). While some of the IVA Pro variants are included by default on supported cameras, others can be added via licenses. This article is dedicated to describing the license process in full.

There might be problems when you are trying to use the Forensic search function for FLEXIDOME Multi 7000i cameras (FW 8.71.0066) after upgrading from BVMS 10.1 to BVMS 11.1.1.65. The message is saying that “Forensic search must be configured for this workstation”

Is there a way to request for the panoramic camera de-warped snapshot via URL?

Find out from here what to do if your FLEXIDOME Multi 7000i or FLEXIDOME Multi IR is coming offline sporadically/ disappears from the network

This article answer to the question: Why am I unable to see the Dewarped view mode menu in Live web GUI of FLEXIDOME panoramic 5100i IR?

When looking at the live view via browser (Dewarped view mode) of FLEXIDOME panoramic 5100i IR camera, the ePTZ controls work only for the 1 top left cameo. This article provides causes and solution regarding this situation. 

This article explains why am I unable to see the Quad view option in the Live web GUI of FLEXIDOME panoramic 5100i IR camera.

This article explains how you can use and set-up dewarping on the FLEXIDOME panoramic 5100i and FLEXIDOME panoramic 5100i IR cameras (edge dewarping).

Some options have been removed when compared to previous CPPs, as they are only useful for moving cameras. Find here the overview of the web page of ‘Live’ functions section and the options remained available for FLEXIDOME multi 7000i (CPP14) cameras.

The System Overview and Dashboard page shows all available data of your camera.  Find more useful information about FLEXIDOME multi 7000i camera from this article!