By extracting the playback in the MOV or MP4 format using BVMS Operator Client, the video is split into multiple files and not in a single file/ segment.
This behavior became visible after upgrading BVMS to version 11.1.1.65.
If you want to disable the digital zoom or to limit the maximum zoom-in of the AUTODOME IP starlight 5100i IR camera, you can do that by using the AUX Command 80 (OFF).
Follow these instructions from this article if the ‘error code=1’ appears in Configuration Client - License Manager during the license activation process.
The MegaRAID controller will automatically detect if a disk has errors causing the RAID volume to be degraded. An error message will appear on the desktop of that system.
The system will also generate a beeping sound indicating it needs attention:
The audio file can be played using the RCP+ command CONF_AUDIO_OUTPUT (0x09b9), payload=4 (Sample), which can of course also be sent to the device itself using ATSL scripting.
For Scriplets (because they are process of BVMS): .NET 4.8. For SDK App: BVMS SDK .dll is compiled in .NET 3.5; .NET 4.8 can be used because it is backward compatible
Starting with firmware 7.10, an option to export from RAM recording buffer allows recording exports on the fly without requiring an SD card or external iSCSI storage.
⚠️ NOTE: This procedure is the same for all 2U and 3U systems and is also applicable for DIP 7000 AIO GEN3 , except 3108 FW might be different, depends on the exact model.
Does your camera show you the live view as in the image below?
During day time (Color-Mode), the image is good, but as soon Night-Mode kicks-in and the IR-LED's turn on, the reflection is noticed.
If you have for e.g. a SNC-EM642R camera and you want to find out which device packs you need for your entire solution, follow the steps from this article.
This article lists the concrete instructions for collecting logs or other important information for issues with DIVAR IP. We will classify the different issue scenarios . Depending on the issue, this article lists the required logging to start the initial troubleshooting process.
