Milestone search tools (People & Vehicles) find results for other cameras. But the Bosch Forensic Search Agent finds zero results for DINION IP starlight 7000 FW v7.89. Why?
This customer explains step by step what can be done when DIVAR IP 7000 server stopped recording suddenly and the Video Recording Manager service is not running.
In the Logbook, you can search for particular events, alarms, devices, and strings of events. You have the possibility to save the BVMS Operator Client alarm logbook, before accepting and clearing it.
Starting with BVMS version 12.0, the Privacy overlay feature was introduced. This feature can be configured to blur objects of type Person, based on a powerful Bosch Artificial Intelligence (AI) function
When trying to get the Software Assurance Report from Remote Portal, it cannot be generated, and the red message below occurs: “Upload a valid system info file or Enter a valid System fingerprint”. Why?
The privacy mask moves around with the image when the MIC IP starlight 7000 HD camera is in PTZ mode.
The camera is integrated into a 3rd party Software.
Be sure that the MIC-7100i camera is configured in BVMS Configuration Client with "Bosch-AutoDome Bilinx" protocol and not with "Bosch-AutoDome" protocol or other options from the list.
This article contains the list of Security Advisories (SA) to inform you about identified security vulnerabilities in our product or service and proposed solutions.
This Authorization Letter is applicable for all Bosch Security and Safety products & software when a password reset for them is requested by customers, system integrators or by a local sales representative.
Do you want to configure Video Content Analysis of your device and "VCA: Authorization required" message is displayed in Configuration Manager? Find out here why this message is displayed and what you should do to fix it.
Yes, it is possible to do this setting (minimum TLS) to multiple cameras at once in Configuration Manager. You can do this change after you authenticate on those cameras. Learn more!
Using the Internet Explorer 11, there is video from all 4 channels in configurator and event monitor, but audio from the camera is present only on channel 1. Since Internet Explorer 11 is EoL, this behavior will not be changed/ improved.
Please note that the relay output of the IO Alarm card is a dry contact relay (with 24VAC/VDC, 5 A). In order to control another circuit that has a 230V you can't do that directly because its higher than it was design for. In order to safety control a 230V, you could use a 24V on that output and control an additional/external relay: powering its coil this relay could switch the 230 circuit of the washer.
