Security: Video

Intelligent Insights is a standalone product. The system can run as a standalone system and be accessed by operators via the web browser or the widgets can be integrated in a BVMS operator client.

In this article you will learn how to install the keyboard drivers and hot to configure a BVMS workstation for Keyboard integration

This article lists the concrete instructions for collecting logs or other important information for issues with DIVAR IP. We will classify the different issue scenarios . Depending on the issue, this article lists the required logging to start the initial troubleshooting process.

This article provides solutions regarding how to resolve SD Card Recording Issues with the MIC-7100i IP starlight and Inteox Cameras

This article explains how to find the source (details of the workstation) and credentials that are used to attempt to login into BVMS (when the attempt has failed)

The firewall configuration dialog is a fixed step in the setup process and will allow automatic configuration of all required firewall settings to run BVMS.

When camera is set to auto track (by web interface) to "auto"-> IVA is detecting an object but camera is not following. Auto tracking works and metadata is displayed only on a stored preposition.

The attached document provides more insights into the system configuration regarding the BVMS - Operator collaboration with Slack

This article presents what symptoms appear in BVMS Operator Client if Time synchronization is wrongly set. Also provides some recommendations about what to do to avoid this symptoms. 

Bosch's Remote System Management service allows you to leverage the power of the Internet of Things (IoT) to provide secure, transparent, and cost-effective asset management throughout the lifecycle of a video system. This service enables end users, system integrators and installers to perform inventory and update management, as well as health monitoring tasks for an entire Bosch video system (DIVAR IP + BVMS + cameras) from one centralized Remote Portal platform.

NetApp SANtricity Dynamic Disk Pools (DDP) technology represents a significant advancement in storage system, data protection and data management. As disk capacities continue to grow without sufficient increases in data transfer rates, traditional RAID rebuild times are getting longer, even up to several days. This slow rebuild results in much more time with degraded performance and exposure to additional disk failures.

When accessing the Operator Client from the Kiosk mode, the camera streams displayed on the cameos show a view that does not match the view from Operator Client running from desktop (Under the BVRAdmin account) or Remote Desktop.

"Remote Portal is not reachable. Please check your network settings, maybe no valid gateway and DNS is configured" Follow the steps from this article and find out how you can register and connect your camera to the Bosch Remote Portal.

In this article you will see how to import project files into Configuration Manager in both versions: v6.10 & v7.41  

Network switch has port security on and shuts down a NetApp iSCSI data port (e.g. CH3). This article is only relevant in aspects of network security / port security where MAC addresses are analysed. Some network security applications are capable of sniffing network packets thoroughly enough to pick up MAC addresses on E-Series Controller ports that are not seen in the Storage Array Profile data.

Let’s suppose that you have one setup which consists in an Adam 6060 I/O module, BVMS and a DINION IP thermal 8000 camera. Can the state of an ADAM relay module be changed when the IVA from the camera generates an alarm?

This article provides causes and solutions regarding the error code 49 Invalid Credentials when trying to login to LSA management software.

This article describes the method about how you can import a .txt file containing a group of cameras from Configuration Manager in Project Assistant App.

This article contains several common questions and answers about Firmware of Bosch MIC IP Starlight 7000i cameras

BVMS v10.1 and  BVMS v11.0 come with a checkbox where you can logon to the Operator Client with Windows Credentials. If you want to use this function, you need to set up the BVMS Configuration Client and browse the AD users-groups. Then, the users can sign in to Operator Client with their Windows-Credentials.