Security: Video

This article provides an ansswer if can I create an Intelligent Insights report containing hourly data for every day.

This article provides causes and solutions regarding  the date and time indication inside the Image Panes  which are not visible in BVMS Operator Client.  

Since VRM 4.10, we have reintroduced the Live & Replay pages in the VRM web GUI.

This article presents how to find the Intelligent Insights version installed on my unit.  

With the new VRM eXport Wizard, we offer the possibility to use CLI commands to do exports without needing to open the application.

Configuration Manager 7.60 by default will only trust CA signed certificates. Changing the security requirements will change the behavior of how CM displays the connection/access.

Have a look at this article and learn how to fix the Add Scriptlet button which does not become active. It stays grayed out. Same happens with ClientScript and ServerScript.

If you want to be able to replay the recording for the complete retention time, you should use VRM replay. VRM should be accessible and added to the VSC

  Important note Currently, the VRM is itself very seldom used in combination with Genetec. Starting with 2022, Genetec developed a new driver for Bosch cameras “Hybrid driver for CPP13/14+”. With this, the VRM is not considered anymore. With the old “Legacy (CPP7.3 and older) the VRM is still supported.      Related Products: VRM, Genetec Security Center Overview: It is possible to use VRM free of charge (no extra VRM license is required) within Genetec Security Center. Genetec is sending encrypted secret to the VRM server with the number of the licensed channels. When VRM receives and validates this, it can be used for that number of channels for 24 h. A periodic license update is send by Genetec, so the VRM licensing is guaranteed as long as it is used with Genetec Security Center. Default settings, if not extra configuration is needed or done. -License for 1000 Cameras - License update is done every hour   How to license more than 1000 cameras or change the license update period for VRM within Genetec Security Center: Open the Config Tool and Launch a Video Task Select the Archiver Go to the Resource Tab and click on Extensions From the Tab Installed extensions select Bosch. In the Tab VRM add a new VRM and/or select already configured VRM. Click on Advanced settings and add the following parameters If you need to license the system with more than the default 1000 licenses – create the parameter with Name VrmLicenseRequestCount and as value put the required number of licenses. The parameter name is case sensitive If you need to change the duration of the period between each license request (there is always one license request when the archiver starts) – create the parameter with Name VrmLicenseRequestPeriod. The duration of the period is in milliseconds. The default value is one hour. If the value is set to 0, the license request are disabled. The parameter name is case sensitive     Press Enter to confirm the entry and then Close Press Apply and then OK. At the webpage of the VRM one can check if the number of licenses is changed. If you would like to know how to replay the recordings from a Bosch camera managed by Bosch Video Recording Manager (VRM) in Genetec Security Center software, please follow this video: How to use VRM recording in Genetec Security Center   Note:  To support customer needs and to leverage the most important features of Bosch cameras (like data security, Video Analytics, and intelligent bitrate management), the agreed focus of Bosch and Genetec is on the Genetec Archiver Recording Solution. Current and future developments are focused on this recording solution and the VRM in Genetec will only be supported to maintain existing and upcoming projects where a VRM solution is selected. There will be no development of new features. In this maintenance mode, the following is possible: • Certification of new VRM versions (for projects)* • Certification of new DIVAR IP’s* *Requirement: stable API on VRM side Note: The VRM itself might offer more functionality not covered with the integration in Genetec.

This article lists different ways to connect to cameras Live/Playback using the Video Security Client/App: to DIVAR IP AIO/BVMS system or to Camera directly, bypassing DIVAR IP AIO/BVMS system.  

License expansions missing after upgrade to BVMS 11 in Remote Portal. Only 1 x MBV-XCHANPLU license activated instead of 16 x MBV-XCHANPLU. What to do?

This article explains how to configure an alarm communication between BVMS and Gmail e-mail address.

This article contains a simplified and generalized example, that could be helpful in building a particular tailored script related to implementation of event receiver in BVMS SDK scriplet.

The digital monitor wall functionality was removed since BVMS v11.0, and this is also stated in the release notes.

If you add a decoder that has 2 monitors connected, you must display the Edit Decoder dialog box of the decoder and update the device capabilities of this decoder. For each monitor add a further monitor wall.

This article explains step by step how to play exported recording files from VRM eXporter Wizard in BVMS Export Player.

This article provides an answer to the question: Can I install Intelligent Insights into DIVAR IP all-in-one 5000?

There is an issue with VRM versions lower than 4.0 where the retention time for recordings from VSG instances is set incorrectly. There are a few things that usually cause the recording mode to be set incorrectly. Find out more details from this article!

This article presents where are the Transcoder Log settings and how to enable them for log collection.  

This article explains why the Live view shows ‘Authentication failed’ in Video Security App.