Security: Video

You may have installed Configuration Manager on your PC, you tried to run it but the software no longer works. What could be the reason?

Check if your system is performing correctly! The VRM Monitor is one of the best options to check if the system is recording correctly, providing a quick overview as well as detailed information about all the cameras and storage added to VRM. In this article you are going to see how to access VRM Monitor from Bosch Video Management System (BVMS) Configuration Client. Furthermore, you will find here some useful information about each section on the Dashboard page.

Follow the steps from this article if you want to configure your camera to detect motion and then send the event to the server, to start recording. This guide helps you set this option only for nights and weekends. It is important that you find the best possible motion detection settings for the camera in order to avoid unnecessary recordings or notifications.

To ensure the highest customer satisfaction and replace the defective hardware faster and more smoothly, it is necessary to register each system for the specific country together with the system location. But where and why should you register your device?

The latest suitable Image for your DIVAR IP R2 Family Device can be obtained from Bosch Central Support Team. Please provide the SN (serial number) from the DIVAR IP 6000/7000 R2 when contacting Bosch Central Support Team.

Find out here what could be the cause of the following message displayed on DIVAR IP 7000 R2: "The instruction at 0x6566f31c referenced memory at 0x00000008. The memory could not be read."

This article describes step-by-step how you can configure the Remote Portal in order to access the Bosch camera from your tablet or mobile phone via Video Security App.

If you are trying to connect your device to the Remote Portal and it says that server is unreachable, please check the firewall blocks and whether certain ports are not blocked.

After clicking the Forensic Search button in Bosch Video Management System (BVMS) - Operator Client, "Video image is not available" message is displayed. What could be the reason?

This article explains how to license a system that runs in full Bosch Video Management System (BVMS) mode with help of Security Systems Software License Manager tool (SLMS).

Do you want to configure the 3rd party iSCSI storage with different LUNs for recording more cameras without Bosch VRM? This article explains you if this application is supported.

This article provides the step-by-step procedure on how to configure “BVMS” presets and save views.

This information may be requested by Central Support Team, as the bundle file is useful for troubleshooting the improper behavior of the unit. This method provides the steps for collecting the NetApp DSA E2800 support bundle.

This information may be requested by Central Support Team, as the bundle file is useful for troubleshooting the improper behavior of the unit. The method for collecting the NetApp DSA E2700 support bundle file is provided below.

The IP camera address is always the key if you would like to monitor or remote viewing it. Like any network device, the camera is assigned an IP address when it is connected to the router with Internet access and powered on. Here we will introduce 3 ways to find the network camera IP address quickly and easily.

This article describes all the steps that will help you to create LUNs after RAID failure.

If you are interested in retrieving the stream of an IP camera using multicast, please check out the options from this article.

This guideline will help you set the position of the camera  image to an appropriate one. If the picture of the camera is inverted in the live view, please follow the steps below to reverse it.

In this article you can find the actions you need to do in order to solve the zoom speed for AUTODOME NDP-7512. A customer could observe a difference in zoom speed in comparison to the previous generation

If you want to control the camera from a DIVAR wired through a VJD 3000, you have to configure the VJD and the DIVAR as well. Below you will find the steps which will help you to set up your devices.