Security: Video

This article answers the question:  Is there a search limit of results in BVMS Operator Client Logbook for collecting license plate data?

Regular BVMS 12.0.1 installer will not run on any DIVAR IP all-in-one platform. The upgrade shall be performed via DIVAR IP System Manager application. Keep in mind: If you want the latest version of BVMS, it must be downloaded and applied with the latest version of System Manager.

Follow this article and download the Bosch Data Security Guidebooks attached

During the BVMS upgrade from v11.1.1 to v12.0 through System Manager v2.0 on the DIVAR IP 6000 AIO, the software file placed on an external drive is not visible to be installed. What could be the cause?

This article shows what to do in case the following message occurs: "Could not add the following devices"  when adding IP cameras FW 7.87  to BVMS 12.0.

The MG Camera Name and Number Setting (BVMS Configuration Client, under MG Camera Settings) was not designed for BVMS Operator Client cameo, but in fact for the CPP-Enc type of decoder like VJD-3000.

BVMS Configuration Client or Operator Client does not display correctly on the DIVAR IP 4000 AIO when opened from the Kiosk mode and appears oversized in fullscreen.

When logging into BVMS Operator Client, there is an alarm showing up: “System Error - Server alarm queue capacity reached”. Find out from this article what could be the cause and how to solve this.

You can lock the control of a PTZ camera for other users. A user with a higher priority can take over the control and lock the camera control. A timeout can be configured for this explicit PTZ locking. If you only take over the control without manually locking it before, the control is locked for the user with lower priority for 5 seconds.

The alarms appear, the forensic search is working fine, but the yellow lines don’t appear on the recording line/ timeline. What to do to display the yellow lines in timeline?

If you would like to exclude certain Events and Alarms from being written in the BVMS logbook you do have the option to exclude such information.  

When entering in BVMS Operator Client, the camera's image is black and only Transcoding option is available for streams (no stream 1 or 2 , or image pane optimized) Desired result: See the camera's live image

This article explains the meaning of each color on the Playback timeline in BVMS Operator Client.

In this article you will learn how to install the keyboard drivers and hot to configure a BVMS workstation for Keyboard integration

This article presents what are the limitations of Privacy overlay in BVMS 12 (Pano cameras, h.263 & MPEG, decoder, VSC).

This article presents what should be checked when the Sever State is Disconnected in Logical Tree from BVMS Operator Client.

This article explains the meaning of the arrows in circle at the central logical tree in the BVMS Operator Client list

The validity of the SMA date should cover the BVMS version release date you wish to upgrade to. Otherwise, the upgrade will not work and you will get the message "It is not possible to upgrade the software of this System Info file to a newer version". Also, please note that this message could occur in case you are trying to upgrade your BVMS and it is on the latest available version released.

Find out from this article what you should check when there is a black image of your camera in Operator Client when clicking on the Instant Playback

This article explains what you can do when the ‘Stream limits’ parameter set in the webpage of FLEXIDOME multi 7000i camera is not visible in BVMS Configuration Client.